|
General Volvo and Motoring Discussions This forum is for messages of a general nature about Volvos that are not covered by other forums and other motoring related matters of interest. Users will need to register to post/reply. |
Information |
|
Cordless Impact WrenchViews : 2013 Replies : 21Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 3rd, 2015, 23:43 | #11 | |
Premier Member
Last Online: Dec 26th, 2021 13:42
Join Date: Dec 2013
Location: Crewe
|
Quote:
Wishbone balljoints and rear bush yes but not front bush bolts Caliper carriers to remove discs, not tried so not sure. Buzzing the wheel bolts off will be easier too. None of the negatives should be a reason not to buy a shiny new tool though.
__________________
2002 S60 SE D5 Manual 209000 miles |
|
The Following 4 Users Say Thank You to cheshired5 For This Useful Post: |
Sep 4th, 2015, 07:30 | #12 |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
wishbone's
drop links front and rear. front discs and pads. rear discs and pads i have done all the above on the other car not in a day tho. having a impact wrench will make the job a tad more pleasant.Yes a shiny new tool albeit its an old tool using it
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
Sep 4th, 2015, 08:08 | #13 |
Ovlovnut
|
I have seen a Snap-on in use in anger on my 240. We used it on the rear axle bushes and the cam pulley. It coped with ease.
On the back of seeing it and with limited budget I bought a Rolson rated at 200mn's . It was just shy of 100 quid. Works and it has done the 240 cam bolt twice now but only just copes. Batteries are stuffed now. They don't keep charge for more than a couple of hours . I'd go snap-on, or bosch. I managed to get to some calliper bolts not all as mine is a bulky thing. Great for whizzing off wheel nuts mind
__________________
2004 V70 2.4SE Auto 'The Welshmobile’ 2002 Laika Ecovip 400i ( Motorhome on an Iveco 2.8TD) http://www.gitessouthbrittany.com/ http://moncopainmonchien.jimdo.com/ |
Sep 4th, 2015, 08:33 | #14 |
I've Been Banned
Last Online: Sep 8th, 2015 13:34
Join Date: Aug 2015
Location: fernley
|
Wouldnt bother with snap on, snap on dont make power tools so it wlil be a bosch or a dewalt or something similiar rebranded with a hefty mark up
|
Sep 6th, 2015, 13:04 | #15 |
Member
Last Online: May 22nd, 2024 08:22
Join Date: Jan 2014
Location: Gloucester
|
Milwaukee tool have a chunky 18v one in their fuel range that does 100/700 foot pounds (modes 1 and 2), as well as an 1100 ft lbs 'nut busting' mode.
Costs a few bob but that is probably the best thing short of an air wrench. |
Sep 6th, 2015, 13:06 | #16 |
Member
Last Online: May 22nd, 2024 08:22
Join Date: Jan 2014
Location: Gloucester
|
|
The Following User Says Thank You to Cromlech For This Useful Post: |
Sep 8th, 2015, 00:25 | #17 |
Pain in the backside
Last Online: Yesterday 21:15
Join Date: Mar 2007
Location: Newport
|
I had pretty good experiences with the cheap and cheerful ebay impacts, they take a while to wind up and 'hit' but are pretty good for £30, I burnt it out however trying to remove a cross threaded bolt, but I had 5 months service out of it.
I needed to remove the fag lighter and attach crock clips and attach it direct to the battery. One like these... http://www.ebay.co.uk/itm/Clarke-12V...item3f4d11fa5f If you burn it out after a few months, so what? They've saved busting knuckles. |
Sep 8th, 2015, 18:12 | #18 |
Member
Last Online: Nov 13th, 2018 09:45
Join Date: Jul 2014
Location: Rotherham
|
At work we use Mikita 18v Impact guns....
They are really good, get some real abuse and just keep going, they are also good at minimising vibrations (HAVS is a big thing at work) I wanted one for my garage and wanted to buy one the same, I thought that if my battery ever expired I could swap it for a good one from work, so I ordered a makita TD127D http://pages.ebay.com/link/?nav=item...obalID=EBAY-GB Unfortunately the battery was different, this one needed an adaptor for sockets and it's generally a cheaper model, That being said it's been good certainly better than the ratchet I had before it although perhaps not as good as the ones at work, but it is good, I also have the matching cordless drill which has been fantastic! Last edited by Tramp; Sep 8th, 2015 at 18:23. |
The Following User Says Thank You to Tramp For This Useful Post: |
Sep 8th, 2015, 18:31 | #19 | |
Premier Member
Last Online: Dec 26th, 2021 13:42
Join Date: Dec 2013
Location: Crewe
|
Quote:
You lose turning force when using socket adaptors and they either don't reproduce their max torque figures or work harder to achieve it. Socket work really needs an impact wrench for best results.
__________________
2002 S60 SE D5 Manual 209000 miles |
|
Sep 8th, 2015, 18:42 | #20 |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
To put this to bed and thanks for all the pointers i purchased this one
GDX18V-EC brushless it will also double up as winding the shed legs up/ down when on site. thanks mike
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
The Following 2 Users Say Thank You to outnumbered For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|