|
Information |
|
V40 R-DesignViews : 3416 Replies : 16Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Feb 6th, 2014, 06:55 | #1 |
New Member
Last Online: Apr 16th, 2014 07:43
Join Date: Feb 2014
Location: na
|
V40 R-Design
My car is a 2013 V40 T4 R-design.
As you can see at attached picture.. there is a big gap between the hood and the front bumper near the headlamps, is this normal for R-design? Sorry for the upside down photo... Last edited by ahbutahbut; Feb 6th, 2014 at 07:00. |
Feb 6th, 2014, 11:39 | #2 |
Master Member
Last Online: Jan 9th, 2019 16:15
Join Date: Mar 2010
Location: Dunblane
|
I would say no. Hard to tell though from this photo. Another couple of photos would help. Not close ups like this one though need to see the overall look.
__________________
2015 V40 se Lux D4 manual, Bright Silver 2012 XC60 se Lux D5 geartronic, Inscription silver.(sold 03/15 - gone but never to be forgotten) 2010 XC60 se Lux D5 geartronic, Bright Silver (sold) |
Feb 6th, 2014, 16:51 | #3 |
VOC Member
Last Online: May 28th, 2024 16:30
Join Date: Apr 2009
Location: Köln, Germany
|
I would also say no. If its the bonnet that sticks up it's a matter of adjusting the bonnet lid itself, very easy. However, I would ask your dealer to do it in case something goes wrong
BUT, it could also be that one side of the bonnet has not been closed correctly hence one side sticking up?!
__________________
2019 XC60 T6 R-Design 2017 S6 Avant 1996 850R 1987 780 Bertone Lots of previous Volvo's |
Feb 6th, 2014, 19:15 | #4 |
Master Member
Last Online: Sep 28th, 2015 03:33
Join Date: Dec 2011
Location: Durham
|
Is bonnet properly shut. Ours is a pig and has to be closed with force to get both catches to lock
__________________
Peugeot 208 GTi Prestige BMW 330d M Sport + Mk2 Golf Gti G60.... |
Feb 7th, 2014, 13:58 | #5 |
New Member
Last Online: Apr 16th, 2014 07:43
Join Date: Feb 2014
Location: na
|
Thanks for the replies! The bonnet is fully closed on both side when I took these pictures. Seems like the rubber seal is shorter than it should be. BTW, could you guys take some photos of your R-design bonnet and post them here? It will make it easier for me to negotiate with the car dealer.
Thank You in Advance!!! Last edited by ahbutahbut; Feb 7th, 2014 at 15:31. |
Feb 7th, 2014, 23:48 | #6 |
Rodney
Last Online: Aug 4th, 2016 05:02
Join Date: Jan 2011
Location: On The Street
|
Not V40 although S60 and V60 for comparison on shutlines.
s60 62 plate bonnet shut lines v60 11 plate bonnet shut lines s60 62 plate again - with a leaf stuck in the shut line - quite apt as shows the size? s6o 11 plate bonnet shut lines Trusting this is helpful? Regards |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|