700/900 under body braces

[Ml 1990 740 turbo]

Can't see why not, but can't say for definite

[Ml 1990 740 turbo]

Just thought I'd mention, Due to the price of steel just going up. I will have to charge £65 for these now.
I will do upper (boxy) and lower brace combined for £110

[Ml 1990 740 turbo]

I have some available. Can't say exactly how many as it depends if the people who where wanting one, get back to me. So if u want a one pipe up because I won't have Them long.

[DrSpanky]

Originally Posted by Ml 1990 740 turbo

I have some available. Can't say exactly how many as it depends if the people who where wanting one, get back to me. So if u want a one pipe up because I won't have Them long.

I got your PM but haven't reached the post count yet to message you back!

Does the brace come with the bolts etc required to fit it? if so i will take it.

also i have received the other bits you sent me.

Thanks Dan

[Ml 1990 740 turbo]

Does yours have s standard brace. If so all u need is 4 m12 x35 bolts, nuts and washers, for the triangulation bars. I recommend using nylon nuts. If yours doesn't have the brace then you'll need a m10 nut and 3 m10 x20 or 25mm bolts

[DrSpanky]

Originally Posted by Ml 1990 740 turbo

Does yours have s standard brace. If so all u need is 4 m12 x35 bolts, nuts and washers, for the triangulation bars. I recommend using nylon nuts. If yours doesn't have the brace then you'll need a m10 nut and 3 m10 x20 or 25mm bolts

my mates driving it around at the moment i just facebooked him to pop his head under, mind holding on to it for until i hear back from him. I think there is room for it to fit on the diesel (i kinda checked, just been awhile since i have looked under it).

[Ml 1990 740 turbo]

No problem if u want it its yours. I always contact the people who have been interested first, before putting them up for grabs. Even if it doesn't have the brace, it's only 3 bolts and a nut, not the end of the world!

[DrSpanky]

Originally Posted by Ml 1990 740 turbo

Does yours have s standard brace. If so all u need is 4 m12 x35 bolts, nuts and washers, for the triangulation bars. I recommend using nylon nuts. If yours doesn't have the brace then you'll need a m10 nut and 3 m10 x20 or 25mm bolts

very decent of you, we will take the upper brace and the lower brace thanks.


Dan

[DrSpanky]

sent this morning, thanks very much.


Dan

[Ml 1990 740 turbo]

Ok, cheers. I'll get them sent next week I'll let u know