|
S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models |
Information |
|
Courtesy lighting roof fittings - Removal instructionsViews : 720 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Dec 2nd, 2020, 22:40 | #1 |
Senior Member
Last Online: Apr 21st, 2024 21:41
Join Date: Feb 2020
Location: Matlock
|
Courtesy lighting roof fittings - Removal instructions
Hi all,
Does anybody have experience or even better, documentation on how to remove both the rear and front courtesy lighting modules/fitting from the roof? I want to swap the bulbs for white LEDs but want to understand how the fittings come out the roof lining before I start ramming screwdrivers in everywhere! I'm guessing a 'gentle' pull with a plastic tool on one edge will help reveal how it comes out but if I knew straight off it would really help.
__________________
65 plate V60 R-Design Lux Nav D4 Auto 20 plate XC60 Inscription Pro T8 PHEV + Polestar Last edited by Yelper85; Dec 2nd, 2020 at 23:01. |
Dec 2nd, 2020, 23:30 | #2 | |
Master Member
Last Online: Apr 14th, 2024 13:04
Join Date: Apr 2018
Location: North Yorkshire
|
Quote:
Last edited by Deck1ng; Dec 2nd, 2020 at 23:33. |
|
The Following User Says Thank You to Deck1ng For This Useful Post: |
Dec 3rd, 2020, 13:32 | #3 | |
Senior Member
Last Online: Apr 21st, 2024 21:41
Join Date: Feb 2020
Location: Matlock
|
Quote:
I'll take a gander at the video.
__________________
65 plate V60 R-Design Lux Nav D4 Auto 20 plate XC60 Inscription Pro T8 PHEV + Polestar |
|
Dec 7th, 2020, 07:34 | #4 |
Senior Member
Last Online: Apr 21st, 2024 21:41
Join Date: Feb 2020
Location: Matlock
|
Morning all,
I managed to get the light fittings down, both very easy. The video Deck1ng suggested was useful, here's the link: https://www.youtube.com/watch?v=Y10j2eJrjUI I actually started at the back rather than the front like in the video as the front on mine was very tight whereas the back came out much easier. The rear light fitting clips in at the sides and again was very easy to remove. All the bulbs in both fittings use T10 wedges. Attached are some photos to help.
__________________
65 plate V60 R-Design Lux Nav D4 Auto 20 plate XC60 Inscription Pro T8 PHEV + Polestar |
The Following User Says Thank You to Yelper85 For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|