T4 Dump Valve Kit

[T4Rick]

I've got one made by forge

[avfcS40]

Originally Posted by pinhead

as mentioned you need the blanking plate, i think forge sell them seperate, if not just make one up out of some thick sheet metal, just be sure to use a gasket of some sort to stop air leaks

best place for fitting -

Hi there,

Which area would you fit the blanking plate as i have the exact dv and plan to fit it at the weekend.

Thanks

[gmain1967]

Originally Posted by avfcS40

Hi there,

Which area would you fit the blanking plate as i have the exact dv and plan to fit it at the weekend.

Thanks

Blanking plate covers space left by original recirc valve, hidden down the back of the turbo. 3 bolts, one of which is a bugger to get at!! And as for the DV itself, it is best to fit as close to the throttle body as possible, though easier as per pic as there is a longer flat portion in the pipe at the intercooler end.

Personally, I'd replace the pipe with reinforced Silicone hoses (as I have done) and you can arrange it to suit best.