|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
dpf replacementViews : 748 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Dec 7th, 2015, 03:19 | #1 |
New Member
Last Online: Jul 27th, 2016 10:36
Join Date: Dec 2015
Location: Armagh
|
dpf replacement
(2004-07 s40 2.0d) Recently got my dpf replaced and the tank refilled, but the car keeps going in to limp mode. I got the dpf replaced at a local garage but dont know if the ECM was reprogrammed. Would this cause this sort of problem? im also getting a fault code about a sensor in the additive tank needing illumination.
Is my problem to do with the dpf or could it be the catalytic converter or one of the many other faults that cause limp mode? egr is untampered with not sure how clean though, same for throttle body but im only getting dpf fault codes. Thanks for the help Last edited by that young lad; Dec 7th, 2015 at 03:22. |
Dec 7th, 2015, 10:08 | #2 | |
Premier Member
Last Online: Oct 29th, 2020 23:25
Join Date: Sep 2015
Location: Midlands
|
Quote:
__________________
2008 S40 2.0d R design auto powershift |
|
Dec 13th, 2015, 16:24 | #3 |
Master Member
Last Online: Jan 25th, 2019 17:19
Join Date: Feb 2006
Location: Kent
|
More than likely moisture in the differential pressure sensor. I had two failures on my car.
First was changed under warranty, second failed at 100k miles, and I got one from a Ford dealer. Easy to fit, as it sits up by the battery. You will have to drive the car for about 20 miles under diferent conditions then the car should be fine. Did a Volvo dealer service the car? If not, then the additive tank counter may need resetting. Low additive gives a message on dash, but no limp mode. I thought Id just mention this. Good luck. |
Tags |
dpf filter, limp home mode, limp mode, s40 2.0d |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|