Replacement Carb for B200/230 Engine - Page 2

adcyork · May 15th, 2013, 21:45

Quote:

Originally Posted by axeman

i have only just read this thread, although i run a b230a (perburg cd175) i quickly ditched the 175cd for a webber dtmr 32/36. the difference i can only say is amazzzzzzing. the maniflod is far more balanced and has better flowing carteristics than 175 one. it completely changed the way in which the engine performs. much better performance, better on fuel. much better surport from the likes of webcom and others.

from my experience there is little surport and little info on the perburg and stromberg carbs, they are both over complex versions of the SU, which is a very very good carb.

if needed i still have the old inlet manifold for the 175cd if required but he carb was given to friend as a working donor for his engine.

just my thoughts neil

How much are you after for the manifold? It would have to be posted of course as I am based in Coventry.

Thanks
Andy

axeman · May 15th, 2013, 22:14

i am guessing the post will be around £10?
and say £15 for the manifold?

neil

adcyork · May 15th, 2013, 22:20

Quote:

Originally Posted by axeman

i am guessing the post will be around £10?
and say £15 for the manifold?

neil

Hi, That's sounds smashing. Can you try http://www.parcel2go.com/ and see if postage would be any cheaper?

I'll take it either way. How would you like payment?

Cheers,

Andy

axeman · May 16th, 2013, 09:52

If you could send the money via pay pal as a gift that would suite me
Neilwitt0303@googlemail.com

If the postage is any more I will foot it. All I need is your delivery address and I will pit it in to shoe box and pop it in to the post for you.

Thanks neil

adcyork · Jun 5th, 2013, 22:59

Axeman, money sent. Address is attached to the paypal payment.

Thanks
Andy

adcyork · Jun 7th, 2013, 08:09

Could one of the mods please PM Axeman for me? I can't message anyone other than mods until I have 30 posts.

Thanks

volvo_saint · Nov 17th, 2013, 10:59

I have a problem with my Stromberg Carb / Inlet Manifold - the throttle cable attachment for the Stromber is close to the no 4 cylinder. My original cable for the Pierburg was close to the no 2 cylinder. My throttle cable cannot make the acute angle to reach the Stromberg carb.

volvo_saint · Nov 17th, 2013, 11:07

[IMG]

[/IMG]

This is the Stromberg Manifold - Throttle attachment close to no. 4 cylinder

volvo_saint · Nov 17th, 2013, 11:11

[IMG]

[/IMG]

Pierburg manifold - throttle attachment close to no. 2 cylinder

volvo_saint · Nov 17th, 2013, 11:26

I do not have the original throttle cable - on the B21 Inlet manifold there are two holes - can they be used to move the throttle cable connection?

Nov 17th, 2013, 10:59	#17
volvo_saint Junior Member Last Online: Jul 8th, 2023 14:27 Join Date: Feb 2007 Location: LIJA View Photos By: volvo_saint	I have a problem with my Stromberg Carb / Inlet Manifold - the throttle cable attachment for the Stromber is close to the no 4 cylinder. My original cable for the Pierburg was close to the no 2 cylinder. My throttle cable cannot make the acute angle to reach the Stromberg carb. __________________ P1800S 1967 - Volvo 240 Estate 1986 - Everyday car...Volvo 164 1968 - Volvo 144 1967 - Volvo 144 1973 model - needs rust repair..and Volvo 164 1973.

Nov 17th, 2013, 11:07	#18
volvo_saint Junior Member Last Online: Jul 8th, 2023 14:27 Join Date: Feb 2007 Location: LIJA View Photos By: volvo_saint	[IMG][/IMG] This is the Stromberg Manifold - Throttle attachment close to no. 4 cylinder __________________ P1800S 1967 - Volvo 240 Estate 1986 - Everyday car...Volvo 164 1968 - Volvo 144 1967 - Volvo 144 1973 model - needs rust repair..and Volvo 164 1973. Last edited by volvo_saint; Nov 17th, 2013 at 11:24.

Nov 17th, 2013, 11:11	#19
volvo_saint Junior Member Last Online: Jul 8th, 2023 14:27 Join Date: Feb 2007 Location: LIJA View Photos By: volvo_saint	[IMG][/IMG] Pierburg manifold - throttle attachment close to no. 2 cylinder __________________ P1800S 1967 - Volvo 240 Estate 1986 - Everyday car...Volvo 164 1968 - Volvo 144 1967 - Volvo 144 1973 model - needs rust repair..and Volvo 164 1973. Last edited by volvo_saint; Nov 17th, 2013 at 11:23.

Nov 17th, 2013, 11:26	#20
volvo_saint Junior Member Last Online: Jul 8th, 2023 14:27 Join Date: Feb 2007 Location: LIJA View Photos By: volvo_saint	I do not have the original throttle cable - on the B21 Inlet manifold there are two holes - can they be used to move the throttle cable connection? __________________ P1800S 1967 - Volvo 240 Estate 1986 - Everyday car...Volvo 164 1968 - Volvo 144 1967 - Volvo 144 1973 model - needs rust repair..and Volvo 164 1973.

May 15th, 2013, 22:14	#12
axeman Junior Member Last Online: Feb 12th, 2014 21:41 Join Date: Nov 2010 Location: belomot, surrey	i am guessing the post will be around £10? and say £15 for the manifold? neil

May 16th, 2013, 09:52	#14
axeman Junior Member Last Online: Feb 12th, 2014 21:41 Join Date: Nov 2010 Location: belomot, surrey	If you could send the money via pay pal as a gift that would suite me Neilwitt0303@googlemail.com If the postage is any more I will foot it. All I need is your delivery address and I will pit it in to shoe box and pop it in to the post for you. Thanks neil

Jun 5th, 2013, 22:59	#15
adcyork New Member Last Online: Jul 23rd, 2013 13:06 Join Date: May 2013 Location: Coventry	Axeman, money sent. Address is attached to the paypal payment. Thanks Andy

Jun 7th, 2013, 08:09	#16
adcyork New Member Last Online: Jul 23rd, 2013 13:06 Join Date: May 2013 Location: Coventry	Could one of the mods please PM Axeman for me? I can't message anyone other than mods until I have 30 posts. Thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)