|
LPG, CNG & LNG - General Info and Issues Share experiences and problems |
Information |
|
Low lpg tank capacity.Views : 1043 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 21st, 2013, 19:32 | #1 |
New Member
Last Online: Nov 6th, 2020 21:38
Join Date: Apr 2010
Location: manchester
|
Low lpg tank capacity.
I have a manual box S40 1.8 2002 bifuel with 105K . Car has a Necam (Koltec) EGI factory fitted system:
Can only fill approx. 31/32 ltrs lpg.!!! I note that , 42 ltr should be the figure (at new) Looking on the various relevant threads here,I see that other owners have complained about only 37/38. Has anyone sorted this issue.? or located the replacement part/s The diagram on Vadis for the Lpg tank & fittings isnt very helpful,although I can see 2 valves(30630222 &30630223) these are volvo part numbers. Many thanks bill |
Sep 21st, 2013, 20:38 | #2 |
Trader Volvo in my veins
Last Online: Yesterday 18:07
Join Date: Dec 2004
Location: Anglesey
|
It will need a new 80% fill stop valve. To fit the new valve you must first remove the float valve.
|
The Following 2 Users Say Thank You to classicswede For This Useful Post: |
Sep 22nd, 2013, 12:53 | #3 | |
New Member
Last Online: Nov 6th, 2020 21:38
Join Date: Apr 2010
Location: manchester
|
low lpg tank capacity
Quote:
Vadis shows 2 valves,(volvo part number 30630222 & 30630223) side by side with the float valve.There is no description to them.Do you have an idea which is which. The car is permanently overseas (East Europe) and the Volvo "agency" know less than me about LPG.I can special parts but trying to identify the correct item.! thanks again |
|
Sep 24th, 2013, 10:10 | #4 |
New Member
Last Online: Nov 6th, 2020 21:38
Join Date: Apr 2010
Location: manchester
|
low lpg tank capacity
thanks again classic swede.
I will be in the UK in a couple of weeks so will obtain 80% valve then Hope I have included/attached a photo of my setup, ? Is the 80% valve below the tank level gauge.? (third fitting from left.? ) thanks |
Sep 24th, 2013, 19:13 | #5 |
Trader Volvo in my veins
Last Online: Yesterday 18:07
Join Date: Dec 2004
Location: Anglesey
|
The 80% valve is the one on the far right with the big hose connected to it.
Before you remove that you must remove the float gauge (3rd from left) by undoing the 4 5mm hex keys. If you fail to pull that out fist you will damage both valves. |
The Following User Says Thank You to classicswede For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|