|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
SRS fault codes.Views : 1386 Replies : 16Users Viewing This Thread : DOGG |
|
Thread Tools | Display Modes |
May 29th, 2018, 22:15 | #1 |
New Member
Last Online: Sep 29th, 2022 17:50
Join Date: May 2007
Location: Birmingham
|
SRS fault codes.
I have a pre facelift d5 V70. Airbag light came on recently and I took it my usual dealer who tried the usual clean the plug under the driver's seat this didn't work. Recommended a new module which Volvo wanted an eye watering amount for.
So the car came home and I tried to have a go at fixing it myself. First job was to get a vida / dice which took a week to turn up. I have 2 error codes both about the side airbag, along a few other minor codes (none on the ECM). The airbag faults are green on the current cycle but have a historic fault logged. I tried to clear the codes but they don't disappear. I have also tried disconnecting the battery for half an hour but still no joy. Having searched the forums there seems to be the odd instance of something similar happening before. So I've brought a replacement module with the same numbers from the same model and year of car. Fingers crossed it is just plug and play if not I need to find somewhere to do a software flash. I'm assuming that by the codes being green on the current cycle (and has been dozens of cycles since the fault has occurred) that the fault is fixed and it's just the old codes that I can't clear. Advice on this odd issue is appreciated! |
May 30th, 2018, 00:18 | #2 |
Premier Member
Last Online: Apr 2nd, 2024 19:50
Join Date: Dec 2007
Location: Wexford
|
What codes are you getting?
|
May 30th, 2018, 02:44 | #3 |
Premier Member
Last Online: Yesterday 07:14
Join Date: Feb 2012
Location: Preston
|
Please post a screenshot of Vida showing the codes.
I had an issue with the srs ecu when I bought my last car, the historic codes wouldn’t clear. Had to take the ecu to a specialist for repair. You can’t just put another module in and expect it to work as you’ll get an ‘incorrect configuration ‘ error. Although it dies work well for testing to see if the faults are real. |
May 30th, 2018, 07:34 | #4 |
Premier Member
Last Online: Apr 2nd, 2024 19:50
Join Date: Dec 2007
Location: Wexford
|
Funny. My experience was almost the opposite.
https://www.volvoforums.org.uk/showthread.php?t=276811 I had earlier cleared a drivers bag stage 1 high resistance by replacing the contact reel with a used part. |
May 30th, 2018, 08:17 | #5 |
New Member
Last Online: Sep 29th, 2022 17:50
Join Date: May 2007
Location: Birmingham
|
Srs-0041 Srs-0107 Here is the picture I took this morning. Showing amber in the delivery tab. Current cycle is green and previous cycles are red in the other tab. Last edited by dodge2005; May 30th, 2018 at 08:26. |
May 30th, 2018, 08:35 | #6 |
Premier Member
Last Online: Apr 2nd, 2024 19:50
Join Date: Dec 2007
Location: Wexford
|
I would be inclined to isolate that bag and put an emulator on the plug to mimic it just to eliminate the bag itself before attempting to replace the module. You can get them from dealers or I bought them from RS for about 50p.
Your alarm siren fuse is out as well Is your DIM acting up in any way? |
May 30th, 2018, 10:29 | #7 |
Premier Member
Last Online: Yesterday 07:14
Join Date: Feb 2012
Location: Preston
|
That is the same issue I had with mine. The errors where shown as inactive, but wouldn't clear. When I swapped the airbag ECU, the error wasn't there but it had an incorrect configuration error so still showed the warning light. Got ECU repaired and it's been good as gold ever since.
|
May 30th, 2018, 19:56 | #8 |
New Member
Last Online: Sep 29th, 2022 17:50
Join Date: May 2007
Location: Birmingham
|
Brendan w - I hope I have the same experience as you. Plug and play would be great.
Dim is fine (appart from the error messages about my airbag!) Which value resistor did you get from rs? Reggit - glad to hear you got your issue fixed as well. Did you take it to main volvo dealer? |
May 30th, 2018, 20:02 | #9 |
Premier Member
Last Online: Apr 2nd, 2024 19:50
Join Date: Dec 2007
Location: Wexford
|
Farnell, now that I've checked
http://uk.farnell.com/multicomp/mckn...5ws/dp/1903906 This is the module. Not all plain sailing. The first one they sent had a P in front of the 8651523 and it didn't work. Last edited by Brendan W; May 30th, 2018 at 20:17. |
May 30th, 2018, 20:20 | #10 |
Premier Member
Last Online: Yesterday 07:14
Join Date: Feb 2012
Location: Preston
|
Absolutely not! I took it to an ecu specialist (the ecu only) that knew what they where doing.
|
Tags |
airbag, srs |
Currently Active Users Viewing This Thread: 2 (1 members and 1 guests) | |
DOGG |
|
|