|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
2006 S60 steering angle sensor.Views : 5240 Replies : 11Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 2nd, 2015, 17:55 | #1 |
New Member
Last Online: Sep 15th, 2015 19:48
Join Date: May 2013
Location: yorkshire
|
2006 S60 steering angle sensor.
Hi folks.
I am new to Volvo DIY work. I have a 2006 s60 d5 with dtsc and four-c. I have anti skid service and four c temporarily unavailable message. I have scanned with a copy Vida dice, that I got from eBay. The steering angle sensor does not communicate with the module. From what I can make out the steering angle sensor is part of the clock spring behind the steering wheel and this is the part I need to replace. What I would like to know for definite is A, does it have to be a brand new part to replace it and B, can I do it myself or is it dealer only job? Regards SB |
Sep 2nd, 2015, 19:51 | #2 |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
Hi
what codes did you get. a software upgrade could be the cheaper option first. they come as a complete unit i think. mike
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
Sep 2nd, 2015, 19:57 | #3 |
VOC Member
Last Online: Yesterday 21:27
Join Date: Feb 2013
Location: North Yorkshire
|
as mike says a software upgrade may fix it as the new software alters the parameters of the sensor. If your unlucky like me then you will need a new sensor and they come as part of the clock spring at about 250 pounds. It will then require a software update or so the vida instructions show which makes it a dealer job
__________________
Previous -03 S40, 04 V70 D5, 04 V70 D5 Sport, 05 V50, 07 S60 D5, 09 V70 D5 R design, 12 XC60 DrivE, 15 V60 D3 Current- 05 XC90 D5 Exec, 12 XC70 D4 AWD Se Lux, 14 S80 D3 Se Lux |
Sep 3rd, 2015, 00:09 | #4 |
New Member
Last Online: Sep 15th, 2015 19:48
Join Date: May 2013
Location: yorkshire
|
Thanks guys.
Bcm 0115 communication problem between control module units communicational problems with sas control signal missing. Bcm 0148 communication problem between control module wrong configuration id. Sum 0337 CAN-signal. Sas control unit signal faulty signal Sas 0007 control unit internal fault Sas 000e steering wheel angle fault Sas 0018 control mo dual signal missing |
Sep 9th, 2015, 11:06 | #5 |
GoldMember
Last Online: Apr 25th, 2024 22:46
Join Date: Jul 2010
Location: Kent, UK
|
anti skid service msg
Hi Guys,
Ive noticed im getting the occasional 'anti skid service required' message coming up on my 06 S60, does seem to be related to using the steering wheel full range, also sometimes a tiny squeak as your turning the steering wheel, so im wondering if it might be the steering wheel posn sensor, has anyone had this apart? and are there any moving contacts in there that might be causing a problem as they wear?. What is the software update about? |
Sep 9th, 2015, 11:46 | #6 |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
Not sure you can take it apart if you can then it's a plus
The software update extends the parameters of the sensor to give it a wider range. It worked for me on this occasion Mike
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
Sep 9th, 2015, 11:48 | #7 |
Lunatic from Wakefield
Last Online: Apr 16th, 2023 06:33
Join Date: Dec 2004
Location: wakefield
|
Have you checked the drive shaft bolts.
Mike
__________________
2012 volvo xc90 Executive Buccaneer Bermuda 2021 |
Sep 10th, 2015, 01:01 | #8 |
I've Been Banned
Last Online: Mar 19th, 2016 19:57
Join Date: Oct 2013
Location: Yondershire
|
Turning steering from lock to lock can reset SAS, but i'm sure you've tried that.
|
Sep 10th, 2015, 21:09 | #9 |
Junior Member
Last Online: Apr 17th, 2024 19:59
Join Date: Jun 2015
Location: Beccles
|
How does turning the wheel from lock to lock reset it?
Last edited by captains3; Sep 10th, 2015 at 21:16. |
Sep 11th, 2015, 07:16 | #10 |
Master Tech
Last Online: May 18th, 2020 10:57
Join Date: Dec 2006
Location: On Contract Dubai Automotve Technical Academy
|
It doesn't, using a scan tool you have to enter calibration mode then turn the wheel full lock to lock so the ECU can work out the extreme left and right angular turning values and then calculate the straight ahead position.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|