Replacing XC90 R-Design Grille Badge?

AleXc90 · Nov 17th, 2014, 03:02

Hi all,
is it easy to replace the R-Design Grille Badge.
The Badge has completely faded and would like to replace it.
Is it an easy job to remove are there instructions that can be downloaded?
Know it's not one where you have to replace the whole grille as the dealer quoted me £35 for a new one and obviously a whole new grille would be a lot more.
Thanks

TheBigGreyBus · Nov 19th, 2014, 04:53

Would be interested to know on this as well.

TruckbusUK · Nov 19th, 2014, 08:51

Hello, I'm sure its just a press fit onto the backing holder (interlocking lugs) .... but you need to be sure you get the correct badge, as the badge and holder are specific to the grille type, which its self has many variants, so take care if the grille has been swapped or replaced at some point.

Hope it helps

MarcX · Jan 28th, 2019, 16:27

Has anyone successfully replaced this and can recommend a supplier?

nu11eaf · Jan 28th, 2019, 22:12

Quote:

Originally Posted by MarcX

Has anyone successfully replaced this and can recommend a supplier?

Have a look on this site, but check and add postage to prices.
https://www.volvobreakers.co.uk/volv...parts-bumpers/

XJSDriver · Jan 29th, 2019, 15:58

My wife managed to write off a builder's van who had the audacity to cut cross her bow at a roundabout - Xc90 just needed a new bonnet and grill but the repairers forgot to put on the badge. Went back and they simply pulled the new badge out of the packet and pressed it into the grill (just clicks in) - sure the grill is standard.

MarcX · Feb 5th, 2019, 16:06

Good site but no R-design badges on there.
Wonder if I could refurb it...

john langrick · Feb 5th, 2019, 16:25

https://rover.ebay.com/rover/0/0/0?m...2F113609911917

MarcX · Feb 5th, 2019, 20:52

Quote:

Originally Posted by john langrick

https://rover.ebay.com/rover/0/0/0?m...2F113609911917

Nice one. Bit pricey for a used badge though.

Pluckem · Feb 7th, 2019, 19:58

I got a copy one off ebay and glued it over the old one. Looks fine

Nov 17th, 2014, 03:02	#1
AleXc90 XC90 R-Design Owner Last Online: Dec 17th, 2014 04:16 Join Date: Sep 2013 Location: Wherever I Travel	Replacing XC90 R-Design Grille Badge? Hi all, is it easy to replace the R-Design Grille Badge. The Badge has completely faded and would like to replace it. Is it an easy job to remove are there instructions that can be downloaded? Know it's not one where you have to replace the whole grille as the dealer quoted me £35 for a new one and obviously a whole new grille would be a lot more. Thanks

Nov 19th, 2014, 08:51	#3
TruckbusUK Petrolhead+Lots of Diesel Last Online: Today 11:10 Join Date: Aug 2008 Location: Glasgow	Hello, I'm sure its just a press fit onto the backing holder (interlocking lugs) .... but you need to be sure you get the correct badge, as the badge and holder are specific to the grille type, which its self has many variants, so take care if the grille has been swapped or replaced at some point. Hope it helps __________________ BMW X3 Msport MHEV 2020MY & VW Beetle Design 1.2Tsi DSG 2014MY Previous XC90 D5 SELux Geartronic 2009MY

Feb 7th, 2019, 19:58	#10
Pluckem Pluckem Last Online: Feb 6th, 2020 20:26 Join Date: Feb 2014 Location: Altrincham	I got a copy one off ebay and glued it over the old one. Looks fine __________________ Xc90 d5 & rs focus mk1

Nov 19th, 2014, 04:53	#2
TheBigGreyBus Junior Member Last Online: Dec 30th, 2014 02:11 Join Date: Aug 2014 Location: around	Would be interested to know on this as well.

Jan 28th, 2019, 16:27	#4
MarcX Junior Member Last Online: Feb 11th, 2023 17:10 Join Date: Nov 2018 Location: Northampton	Has anyone successfully replaced this and can recommend a supplier?

Jan 29th, 2019, 15:58	#6
XJSDriver XJS Driver Last Online: Yesterday 20:51 Join Date: Apr 2017 Location: Hitchin	My wife managed to write off a builder's van who had the audacity to cut cross her bow at a roundabout - Xc90 just needed a new bonnet and grill but the repairers forgot to put on the badge. Went back and they simply pulled the new badge out of the packet and pressed it into the grill (just clicks in) - sure the grill is standard.

Feb 5th, 2019, 16:06	#7
MarcX Junior Member Last Online: Feb 11th, 2023 17:10 Join Date: Nov 2018 Location: Northampton	Good site but no R-design badges on there. Wonder if I could refurb it...

Feb 5th, 2019, 16:25	#8
john langrick Master Member Last Online: Yesterday 22:15 Join Date: Dec 2016 Location: Southend on sea	https://rover.ebay.com/rover/0/0/0?m...2F113609911917

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)