|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
On and Off ABS Service/Brake assist service - BCM-0070Views : 9794 Replies : 29Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 26th, 2016, 02:41 | #1 |
From far away
Last Online: May 9th, 2023 05:21
Join Date: Dec 2006
Location: Selangor
|
On and Off ABS Service/Brake assist service - BCM-0070
Hi
Been getting this message on and off for the past couple of months. I thought it was related to a bad CEM / wiring issue but after resolving that it has come back again yesterday. The consistent DTC I'm getting is BCM 0070. Which points to the ABS pump. I've received advice to get a new unit (module plus pump). I have cleaned the big connector at the brake control module with no luck. Have anyone else had this problem before? Can the pump only fail? Has anyone replaced or repaired the pump before? I've read the correct pump is difficult to get and is mated to whether the car has DTSC or not and the pump part no is not a good guide. Thanks!
__________________
XC90 2.5T 2009 B5204T5 S80 2005 - sold B4204T3 V40 2004 - sold B230E 740 1989 - sold |
Dec 26th, 2016, 02:57 | #2 |
From far away
Last Online: May 9th, 2023 05:21
Join Date: Dec 2006
Location: Selangor
|
Forgot to add. Using VIDA I can hear the pump activated. But this is with current cycle status showing no fault so not sure how accurate this test is
__________________
XC90 2.5T 2009 B5204T5 S80 2005 - sold B4204T3 V40 2004 - sold B230E 740 1989 - sold |
Dec 26th, 2016, 12:10 | #3 |
Premier Member
Last Online: May 31st, 2022 11:32
Join Date: Nov 2009
Location: south
|
Could be a cracked reluctor ring on front drive-shafts which don't throw up a code... have you checked them?
|
Dec 26th, 2016, 15:44 | #4 |
From far away
Last Online: May 9th, 2023 05:21
Join Date: Dec 2006
Location: Selangor
|
Not yet. Any guides around on how to check and replace? Would a cracked ring make a sound? I have this sound from the front right wheel.
__________________
XC90 2.5T 2009 B5204T5 S80 2005 - sold B4204T3 V40 2004 - sold B230E 740 1989 - sold |
Dec 26th, 2016, 21:01 | #5 |
FD
Last Online: Aug 23rd, 2023 22:44
Join Date: Jan 2013
Location: Darlington
|
I've literally just replied to a thread that has the "process" in Aslan. Mine is suffering the same fate.
Just bought a pair of new rings off the bay for less than £10, so I'll be tackling this after New Year. I would have done a guide, but for some reason on this site the pictures disappear a bit too prematurely to be of any use so I'm not going to bother. If it's like a clunk, that could be a brake pad moving about in the carrier. |
The Following User Says Thank You to Funky Diver For This Useful Post: |
Dec 27th, 2016, 05:30 | #6 |
From far away
Last Online: May 9th, 2023 05:21
Join Date: Dec 2006
Location: Selangor
|
Thanks Funky Driver. Will check the rings first. Today the XC90 is behaving, no error message.
__________________
XC90 2.5T 2009 B5204T5 S80 2005 - sold B4204T3 V40 2004 - sold B230E 740 1989 - sold |
Jan 30th, 2017, 09:48 | #7 |
From far away
Last Online: May 9th, 2023 05:21
Join Date: Dec 2006
Location: Selangor
|
An update, the rings are fine.
The error messages are coming on nearly every day. And almost always after driving for more than an hour. It resets itself in the morning after driving the car for a short distance. Probably the computer self checking and finding the error not present and clearing the codes. Sounds like a heat issue. I checked the codes again today, the same BCM 0070. Anything else I should check? Based on the code and what I've searched on the internet, I'm not entirely sure if it's a module or a pump issue. I'm thinking of removing the pump and cleaning the pump connector but can't find anyone solving this problem by doing that.
__________________
XC90 2.5T 2009 B5204T5 S80 2005 - sold B4204T3 V40 2004 - sold B230E 740 1989 - sold |
Mar 4th, 2017, 02:55 | #8 |
From far away
Last Online: May 9th, 2023 05:21
Join Date: Dec 2006
Location: Selangor
|
Solved this issue.
I removed the brake module and the pump. I cleaned the connectors to the pump and the mating surface of pump to hydraulic unit. It didn't look dirty really. I can't find a non-destructive way of opening the pump to inspect the brushes and the clean the insides. Crossed my fingers and reinstalled everything back. It's been nearly a month now since I cleaned the pump and the ABS error code hasn't come back.
__________________
XC90 2.5T 2009 B5204T5 S80 2005 - sold B4204T3 V40 2004 - sold B230E 740 1989 - sold |
The Following 6 Users Say Thank You to aslan For This Useful Post: |
Mar 4th, 2017, 10:30 | #9 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
Result!
__________________
Greg |
Feb 24th, 2019, 15:54 | #10 |
From far away
Last Online: May 9th, 2023 05:21
Join Date: Dec 2006
Location: Selangor
|
I'm updating this thread with some pics as a fellow owner has PM about this issue.
The connector to the pump can be seen above.
__________________
XC90 2.5T 2009 B5204T5 S80 2005 - sold B4204T3 V40 2004 - sold B230E 740 1989 - sold |
The Following 3 Users Say Thank You to aslan For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|