|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
Introduction and Engine Swap QuestionViews : 688 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 4th, 2017, 20:42 | #1 |
Member
Last Online: Oct 13th, 2021 16:10
Join Date: Oct 2009
Location: Milford Haven
|
Introduction and Engine Swap Question
Hi All,
I've just become the proud owner of a 1987 Silver 240 GLT. Its a 2.3 B230E Auto. I'm genuinely over the moon after wanting a 240 for a long time! But I'm also a lover of the Whiteblock engines after owning a few more modern volvos. I've read a number of threads regarding swapping in Whiteblock engines. It seems to me that the most straightforward route is buy a 960 a use it a single donor for the whole drivetrain. I already have an aftermarket ECU I want to use but I have a question I hoped the masses could help with. Ideally I would like a 960 manual gearbox but can the 960 auto gearbox be used in a 240? Is there any electronic control required to make it work. If anyone has any other advice I'm happy to hear it. Many Thanks Liam Mc
__________________
'95 960 RWD 105k miles (Donor Vehicle) '87 240 RWD 92k miles '02 S40 FWD 100k miles '99 V70 AWD 155k miles SOLD Link to my 240 Engine Swap Build Thread |
Nov 6th, 2017, 09:09 | #2 |
No I'm not the redhead
Last Online: Nov 25th, 2022 09:49
Join Date: Jun 2009
Location: North Yorkshire Coast
|
I did do a guide on it but Photobucket ruined it and half of the pictures disappeared.
Not sure about using a 960 auto but I would say, if you want a manual then hold out for a manual. By wanting the manual but doing the auto, youll always wish you had gone for the manual. With the effort involved, do it once and do it right. My guide here: https://www.volvoforums.org.uk/showthread.php?t=199342 |
Nov 6th, 2017, 11:36 | #3 | |
Premier Member
Last Online: Oct 26th, 2023 20:42
Join Date: Jun 2010
Location: Thurrock
|
Quote:
That is generally a good rule in life I reckon. So yes hold out for the manual stick change box. I know nothing about the proposed engine swap. So otherwise I just will say all the best with that project. Stephen |
|
Nov 6th, 2017, 16:19 | #4 |
Premier Member
Last Online: Oct 28th, 2023 12:30
Join Date: Feb 2009
Location: dereham
|
This is something swilling around in my cluttered mind too, at the moment.
I want to fit a 960 six into our 265.( It already has the right antiroll bar!). Has anyone done this in the UK? There are some on youtube in Sweden, all a bit mega boy racer. I just want to make an effortless wafter. I also loath automatics. Limp mode nasties and all that. Finding a manual 960 is the snag. I'm thinking about adapting an M46 to the straight six. Probably on the edge of its strength, but they were behind torque y Turbos and V6s back in the good old days. A V6 clutch would be the way to go. Prop can be shortened easily enough, exhaust could run into the original system at a pinch but twin pipes would be much better. Cats? Not sure if they are needed on a swap like this. MOT wise they aren't. The Motronic wiring is considerable. Failing that, how difficult would it be to get a tin sump made up to suit a five cylinder? Straight sixes seem to be rare and the prices of donor cars are climbing. I won't cut up a decent car just for an engine swap Your car being a GLT, probably has a 3.5 diff which is a good start. The other route is a redblock turbo but that has snags too on a RHD car, surely? best of luck, Jim |
Nov 6th, 2017, 23:20 | #5 | |
No I'm not the redhead
Last Online: Nov 25th, 2022 09:49
Join Date: Jun 2009
Location: North Yorkshire Coast
|
Quote:
The whiteblock m90 is the best at the job for the money. Why bother fabricating stuff and using old parts when you can buy the part you need? Manual m90s are not growing on trees but they aren't hard to find either. The problem is that people are just too tight to pay £600 for a car because they want the gearbox. The trick is to break the car for spares and get some cash back. Otherwise you could spend £500 on making a gearbox fit that won't work very well. Plus you're getting a good 90% of the parts for a whiteblock conversion all in one go rather than having to find them all seperately. You only need cats on a 240 if it's a 93 but you could sneak it through. Cats are not needed if putting a newer engine into a cat exempt car. Why get a tin sump made for a 5 pot? You use the 960 sump and have a cylinder worth cut out of it professionally. Manual 240s usually have a 3.54 diff. Autos have a 3.73. Redblock turbo is a piece of ****, especially if you car is a LH car originally. All that's really needed is to fit the right ecu and ezk box, use some t5 blue injectors, upgrade the fuel pump and get a custom downpipe made to clear the steering rack. Loads of 240 turbos in the UK now, it's a popular conversion. |
|
The Following User Says Thank You to Antz For This Useful Post: |
Nov 7th, 2017, 13:45 | #6 |
Member
Last Online: Oct 13th, 2021 16:10
Join Date: Oct 2009
Location: Milford Haven
|
I very much appreciate your replies gents. I have seen your excellent guide Antz. Much to consider. I will keep an eye out for a 960 Manual. Its just that I absolutely loathe the auto in my car and want rid asap I'd even consider swapping to an M47 in the short term.
__________________
'95 960 RWD 105k miles (Donor Vehicle) '87 240 RWD 92k miles '02 S40 FWD 100k miles '99 V70 AWD 155k miles SOLD Link to my 240 Engine Swap Build Thread |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|