Narrowing down misfire - Page 2

Tannaton · Oct 24th, 2017, 07:12

[post deleted as i'd misread the question!]

Janis Dravnieks · Oct 30th, 2017, 10:07

Thanks for you replay.
I check voltage. When nothing is turn on, than voltage is 14.3 volt, but when I turn on lights, AC, rear window heating, front seat heating and front fog lights than voltage is 13.8 volts.
I read fault codes - U032200

Janis

Janis Dravnieks · Nov 28th, 2017, 07:36

Hello everyone, finally I found a solution with misfiring at idle. I found guys who just worked with volvo and told them my fault. They said it was necessary to open the engine control box and, by connecting it to the microchip, could set to zero the adoption of the injection nozzle. I took the car to them, saw how they did it. ANDDD.. My Volvo at idle is workind ideal. Thanks to everyone who helped.
Janis

Martin Cox · Nov 28th, 2017, 10:59

So glad you got it sorted out and thank you for letting us know what the solution turned out to be.

Best wishes

Martin

Oct 24th, 2017, 07:12	#11
Tannaton Bungling Amateur Last Online: Yesterday 10:46 Join Date: Aug 2014 Location: Beverley, East Yorks	[post deleted as i'd misread the question!] __________________ 2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135 Last edited by Tannaton; Oct 24th, 2017 at 07:14.

Oct 30th, 2017, 10:07	#12
Janis Dravnieks New Member Last Online: Dec 7th, 2017 15:45 Join Date: Oct 2017 Location: Riga	Thanks for you replay. I check voltage. When nothing is turn on, than voltage is 14.3 volt, but when I turn on lights, AC, rear window heating, front seat heating and front fog lights than voltage is 13.8 volts. I read fault codes - U032200 Janis

Nov 28th, 2017, 07:36	#13
Janis Dravnieks New Member Last Online: Dec 7th, 2017 15:45 Join Date: Oct 2017 Location: Riga	Hello everyone, finally I found a solution with misfiring at idle. I found guys who just worked with volvo and told them my fault. They said it was necessary to open the engine control box and, by connecting it to the microchip, could set to zero the adoption of the injection nozzle. I took the car to them, saw how they did it. ANDDD.. My Volvo at idle is workind ideal. Thanks to everyone who helped. Janis

Nov 28th, 2017, 10:59	#14
Martin Cox VOC Member Last Online: Yesterday 10:13 Join Date: Dec 2001 Location: Hull	So glad you got it sorted out and thank you for letting us know what the solution turned out to be. Best wishes Martin

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)