|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
D5 Auto ('06) rumbles on load turning left!Views : 489 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 27th, 2020, 23:50 | #1 |
New Member
Last Online: Dec 17th, 2020 12:55
Join Date: Sep 2019
Location: Old Coulsdon
|
D5 Auto ('06) rumbles on load turning left!
Evening all, as above my car rumbles from somewhere that seems to be in the drivers footwell when accelerating moderately particularly when turning left. It doesn't do it when turning right and when straight only with hard acceleration.
I have replaced front wheel bearings and drive shafts which has made no difference. Any suggestions what could be causing this? Alternatively is there a specialist in these cars in the south east I can trust? Thanks in advance David |
Nov 28th, 2020, 07:27 | #3 |
Me ? Surely Not!
Last Online: Today 19:48
Join Date: Jul 2010
Location: 2007 Volvo XC90 D5 Geartronic. South of Hadrians Wall.
|
+1 particularly the rear mount as that can allow the gearbox and angle gear flange to contact subframe and heat shield on an XC90.
I have replaced all of my mounts including the gearbox torque mount. The engine mount under the crank pulley was well and truly past it's best on mine.
__________________
“Do the right thing. It will gratify some people and astonish the rest.” – Mark Twain 😊 2007 Volvo XC90 D5 SE Geartronic |
The Following User Says Thank You to S60D5-185 For This Useful Post: |
Nov 28th, 2020, 13:55 | #4 |
Bungling Amateur
Last Online: Today 20:52
Join Date: Aug 2014
Location: Beverley, East Yorks
|
Check subframe bolts are tight too....
__________________
2011 XC90 D5 Executive 2003 C70 T5 GT 2012 Ford Ranger XL SC 1977 Triumph Spitfire 1500 1976 Massey Ferguson 135 |
The Following User Says Thank You to Tannaton For This Useful Post: |
Dec 4th, 2020, 11:34 | #5 | |
New Member
Last Online: Dec 17th, 2020 12:55
Join Date: Sep 2019
Location: Old Coulsdon
|
Quote:
|
|
The Following User Says Thank You to Ark Royal For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|