V70 P2 Towbar Installation

[Marmitespreader]

Hiya

7 pin harness: 30681980, approx £20 inc. vat. (as of July 2012)

13 pin harness: 8633887, (not sure of price)

The software is for the fog switch off.
You may need a miniature 5 pin relay for the tow fog to work, any automotive shop.
Also, a standard size 4 pin relay may be required, depending on what you want to work, either reversing lights or 12v accessory.
I will upload pdf's when the forum is fixed.

[V70T Jeff]

Originally Posted by Marmitespreader

Hiya

7 pin harness: 30681980, approx £20 inc. vat. (as of July 2012)

13 pin harness: 8633887, (not sure of price)

The software is for the fog switch off.
You may need a miniature 5 pin relay for the tow fog to work, any automotive shop.
Also, a standard size 4 pin relay may be required, depending on what you want to work, either reversing lights or 12v accessory.
I will upload pdf's when the forum is fixed.

Many thanks for the part number fella, top man! Would be nice to have the 12v accessory (not bothered re fogs or reversing to be honest). At least with the 7 pin I can hitch up and tow next weekend which is all internal management and the kids need. Will look at the aux 12v at a later date. Many thanks for that!

[Marmitespreader]

The forum is still having difficulties uploading files, so if you want the wiring pdf, which shows what wires to swap in the harness plug as to what you want, really easy to do. Just PM me an email address & I will send a pdf to that address.
Jim

[V70T Jeff]

Many, many thanks for your help on this - much appreciated!!

[SE4dr]

Originally Posted by Marmitespreader

The forum is still having difficulties uploading files, so if you want the wiring pdf, which shows what wires to swap in the harness plug as to what you want, really easy to do. Just PM me an email address & I will send a pdf to that address.
Jim

any chance you could upload the wiring instructions. i am fitting a towbar on 56 reg (my2007)S60. Thanks in anticipation

[outnumbered]

the wiring instructions are just plug and play from volvo

[Marmitespreader]

Originally Posted by SE4dr

any chance you could upload the wiring instructions. i am fitting a towbar on 56 reg (my2007)S60. Thanks in anticipation

As Mike says, the instructions come with the harness. But ive put together the 7 & 13 pin for you.

[SE4dr]

Originally Posted by outnumbered

the wiring instructions are just plug and play from volvo

Just finished fitting the twobar with help of great video at top
Can someone please tell me how to find the socket that will plug an play with with my towbar wiring. I have taken out the 2 side panels with the bracket release . The only thing thats floating in there has ECU and ECU assembly numbers on it. There is a board with fuses and it has 2 plugs plugged in and there is a vacant male socket(12 pin)
Any help appreciated

[outnumbered]

it has to be plugged into the Rem, in the vacant slot, you will also need to put a fuse into the fuse holder did mine 4 months ago and forgot which position i put the fuse in, i just tried them all untill it worked lol .
not much help really lol
but that's the jest of it
mike

[SE4dr]

Originally Posted by outnumbered

it has to be plugged into the Rem, in the vacant slot, you will also need to put a fuse into the fuse holder did mine 4 months ago and forgot which position i put the fuse in, i just tried them all untill it worked lol .
not much help really lol
but that's the jest of it
mike

Not very technical Sorry. Whats the Rem. I must be a bit stupid too as I dont understand this either. From PDf above
Illustration B
 Secure the cable harness to the cable harness behind the battery with tie straps (2) from the kit.
 Connect the routed ground cable to the grounding point (3) behind the battery and tighten the grounding screw securely.
 Detach the trailer module (TRM) from the Velcro fastener on the back side of the plate in front of the fuse holder.
 Plug in the tow bar wiring connectors:
 green (GN) and grey (GR) connectors to the control module.
 black (SB) connector to the fuse holder.
 Reinstall the control module.
 Secure the excess cable with a tie strap from the kit.