|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Replace engine undertray nutsViews : 1027 Replies : 9Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 14th, 2018, 19:13 | #1 |
Junior Member
Last Online: Mar 4th, 2024 10:59
Join Date: Feb 2018
Location: Workington
|
Replace engine undertray nuts
can anyone tell me how to replace the plastic nuts which the torx screws screw into to hold the tray under the engine on, With the screws being removed several times I can seem to get a good hold with the screws. (Do the nuts just pull out?)
Thanks. |
Mar 14th, 2018, 19:28 | #2 |
Master Member
Last Online: Dec 16th, 2020 20:33
Join Date: May 2009
Location: kirknewton
|
Same happened to mine, I just replaced the screws with these https://www.ebay.co.uk/itm/10x-Hex-S...0AAOSwSzRZN82c worked a treat.
|
The Following 4 Users Say Thank You to kenny For This Useful Post: |
Mar 14th, 2018, 19:56 | #3 |
Junior Member
Last Online: Mar 4th, 2024 10:59
Join Date: Feb 2018
Location: Workington
|
Top tip. Thanks, Kenny.
|
Mar 22nd, 2018, 08:48 | #4 |
Junior Member
Last Online: Mar 4th, 2024 10:59
Join Date: Feb 2018
Location: Workington
|
Tried the screws Kenny, they didn't work, worth a try though. Going to replace the plastic inserts, they just lever out and the new ones push in. Haven't got a price from Volvo yet. Although thinking about it fatter screws would probably do the trick.
|
Mar 23rd, 2018, 08:49 | #5 |
Senior Member
Last Online: Jan 10th, 2019 14:27
Join Date: Apr 2009
Location: Edinburgh & Aviemore
|
Wilco.... please please post the part # when you get them from Volvo? I'll order some from FRF once we have a part #... cheers
__________________
2009 XC70SE Geartronic |
Mar 23rd, 2018, 11:48 | #8 |
Senior Member
Last Online: May 19th, 2021 11:48
Join Date: Jul 2017
Location: Swansea
|
Skandix sell them for 285euro for the 5-cylinder cars (31316517) and 385euro for the 4-cylinder cars (31370000)
They basically fit via the original mounting holes - you remove the square inserts, drill the existing square hole to round and insert a rivnut (basically a pop rivet with a thread inside. Last edited by 1monkey600; Mar 23rd, 2018 at 11:50. |
Mar 26th, 2018, 14:59 | #9 |
Senior Member
Last Online: Jan 10th, 2019 14:27
Join Date: Apr 2009
Location: Edinburgh & Aviemore
|
Aha - done some research and found this:
The rear two are Volvo part #30683311 The other (red) ones in front are #30683256 New screws #998164 I will order an assortment next time I place an order with FRF... see https://www.volvopartswebstore.com/s...roduct=1126633
__________________
2009 XC70SE Geartronic Last edited by MartinK; Mar 26th, 2018 at 15:02. |
Apr 29th, 2018, 09:18 | #10 |
Junior Member
Last Online: Mar 4th, 2024 10:59
Join Date: Feb 2018
Location: Workington
|
Under tray nut part numbers
The part numbers for the under tray fasteners are
Plastic nut 30683256 6 point screw 998164 |
The Following User Says Thank You to Wilko66 For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|