|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
Saloon tail light options?Views : 792 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Dec 5th, 2018, 07:06 | #1 |
Member
Last Online: Sep 5th, 2020 15:16
Join Date: Jun 2006
Location: Cheshire
|
Saloon tail light options?
Hi all,
Got several issues with my 91' saloon's rear lights. Getting the 'bulb out' light, which then stays on, whenever I operate brakes. Trouble is brake lights are fine with new bulbs. Having looked at the tail lights and fiddled with the earth to no avail, the plastic printed circuit board is pretty manky, as per many videos on youtube show. So I guess one option is to 'hardwire' them as per this video, doing away with the circuit board: https://www.youtube.com/watch?v=pQRtz5mD8Aw However, most the the bottom clusters are also filled with water (which I'm guessing has led to circuit crustiness). So I guess I could also drill a small hole in said clusters as a drain? But then... my clusters are also pretty scratched, warped with heat etc and look a bit worn out, so perhaps time to invest in new clusters? Problem here being, they seem to be readily available in the US and on continent, but can't find any from the usual suppliers here in the UK? Anybody know anywhere that stocks them? Charlton Volvo do a left one, but no right: https://www.ebay.co.uk/itm/Volvo-240...w/283194003567 These guys in Germany do left and right? I presume its the same light pattern as the UK spec 240? https://www.ebay.co.uk/itm/Tail-Ligh...r/302983239376 Anybody know anywhere else in UK that can get a new set? Thanks! |
Dec 5th, 2018, 09:03 | #2 |
Torquemeister
Last Online: Yesterday 08:36
Join Date: Dec 2004
Location: Asgard, Cheshire
|
They should be identical. The only caveat is that the lighting pattern changed in, I think 1990, with the tail lights becoming separated and, IIRC, the stop and rear fog lights swapping positions.
Interestingly, the German ones are GLT ones; they have a black surround whereas the other models have a satin chrome surroun. I might have at least one rear lamp cluster in my garage, but it won't be perfect and might be the wrong version for your car. Let me know if you're interested.
__________________
loki_the_glt - Skipper of the Exxon Valdez, driver of Sweden's finest sporting saloon - and pining for another Slant-4. |
Dec 5th, 2018, 09:21 | #3 |
Premier Member
Last Online: Oct 26th, 2023 20:42
Join Date: Jun 2010
Location: Thurrock
|
I don't know about the different rear light units, sorry. Loki has explained.
A couple of simple things though. Re the bulb failure warning light, doe your car have a high level brake light? I have heard that has to be "factored in" by the bulb warning system. If it is original to the car, then if that bulb is not working, the system will detect that. If it is an accessory, the bulb warning system will detect an inbalance between left and right....that's how the bulb failure works. Oh and are all the brke light bulbs in definitely good condition, no filament weaknesses, and of matching quality? Re water. Where is it coming from? Is water getting past the seal between the light unit and car body, or ..... ??? Good luck. |
Dec 6th, 2018, 01:58 | #4 |
Senior Member
Last Online: Oct 9th, 2022 04:41
Join Date: Feb 2011
Location: Currumbin, Queensland
|
I replaced a leaky rear light on my estate this year with a new unit complete with a new circuit board, seal, and bulbs included. I ordered it from Skandix. The aftermarket ones are less than a hundred euros each. It's the easiest solution. I've got the wrong tail lights on my 1990 saloon: I got used ones off an '86. Surgery is needed to make them work correctly, as Volvo changed them in about 1990. You have to cut the white plastic bulb holder out of the old one and glue it in to the new one after you've cut out the same sized hole in it. I didn't bother doing the surgery, which means the warning light is on when the headlights are on, and the rear lights are brighter than they should be.
__________________
Present: 1990 240GL saloon, 1992 240 estate Past: 1988 240GL; 1971 144DL; 1972 145DL |
Dec 6th, 2018, 06:57 | #5 |
Member
Last Online: Sep 5th, 2020 15:16
Join Date: Jun 2006
Location: Cheshire
|
Thanks folks.
So the German ones seem OK and Skandix can probably sort me out. Good to know. I need to have a poke about and see if I can see where water is getting in. I imagine the black, gummy, sealant stuff that separates the different plastic blocks is letting water in. Can see where else it'd be coming from. |
Dec 14th, 2018, 19:16 | #6 |
Not a junior anymore
Last Online: Apr 15th, 2024 19:03
Join Date: Nov 2014
Location: Worcester/Droitwich
|
bulbs
check bulbs are the correct ampage..??
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|