Lower front wishbone washers

Burdekin · Jun 4th, 2014, 20:06

Hi,

We've somehow lost the two big washers from one side that go on the big bolt that connects the front lower suspension wishbone to the crossmember, would anyone have any that they don't need?

Cheers,

Mitch

222s · Jun 4th, 2014, 21:25

The ones that go at the nut end have a smaller central hole so that they bottom out on the shoulder at the base of the thread when the nut is tightened. The ones for the other end of the bolt have a larger hole, so that the shank fits through, and those fit up against the head of the bolt. Thus worth clarifying which ones you need - is it a bolt set, or two of one type, and if so which?

If you are not in too much of a hurry, I will probably have a spare set in the next few weeks.

Burdekin · Jun 4th, 2014, 21:31

Quote:

Originally Posted by 222s

The ones that go at the nut end have a smaller central hole so that they bottom out on the shoulder at the base of the thread when the nut is tightened. The ones for the other end of the bolt have a larger hole, so that the shank fits through, and those fit up against the head of the bolt. Thus worth clarifying which ones you need - is it a bolt set, or two of one type, and if so which?

If you are not in too much of a hurry, I will probably have a spare set in the next few weeks.

One of each Paul, so a set for one bolt/side.

Jun 4th, 2014, 20:06	#1
Burdekin Chief Bodger Last Online: Yesterday 20:11 Join Date: Oct 2009 Location: Aberdeen	Lower front wishbone washers Hi, We've somehow lost the two big washers from one side that go on the big bolt that connects the front lower suspension wishbone to the crossmember, would anyone have any that they don't need? Cheers, Mitch

Jun 4th, 2014, 21:25	#2
222s Amazoniste Last Online: Sep 19th, 2016 21:52 Join Date: Nov 2002 Location: Emsworth View Photos By: 222s	The ones that go at the nut end have a smaller central hole so that they bottom out on the shoulder at the base of the thread when the nut is tightened. The ones for the other end of the bolt have a larger hole, so that the shank fits through, and those fit up against the head of the bolt. Thus worth clarifying which ones you need - is it a bolt set, or two of one type, and if so which? If you are not in too much of a hurry, I will probably have a spare set in the next few weeks. __________________ Paul - 1967 Amazon 222S B20 o/d Estate & 1961 A-H Sprite Mk2 948cc WANTED - For '67 Amazon estate - offside rear quarter, preferably new old stock.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)