Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > 200 Series General > 200 Series Articles

Notices

200 Series Articles How to's and Guides for the 200 series.

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

How to fit 960 light up window switches

Views : 7298

Replies : 0

Users Viewing This Thread :  

 
 
Thread Tools Display Modes
Old May 27th, 2011, 13:17   #1
240
BOB MY BIG OLD BUS
 
240's Avatar
 

Last Online: Jan 15th, 2014 02:06
Join Date: Apr 2010
Location: NORTH EAST
Wink How to fit 960 light up window switches

later 940/960 switches have a light up facility when the ignition is on, they look much better than the standard 240 switches as the little pic of the widow lights up!! they take around 10 mins to change and make a big improvement.you must buy 5 pin switches as four pin will not work

tools needed........ torx 25 bit and long handle. small thin flat screwdriver.

first remove the rubber screw bungs and then remove the torx bits and the handle comes away but careful not to pull switch too far as to stretch the wires.


make a note of which wire fits which switch, the wires will only fit onto the switches one way so its impossible to fit new switches wrong way round.


once removed the switches look like this from the rear


now using the small flat screwdriver carefully push down the edge of a switch and prise tab backwards, dont worry about bending the peg as when switch is removed it pushes back into place


once both pegs are prised back the switch pushes out from the front


fitting the new switches is a revesal, just push in the new switch and connect the wires and test before refitting arm rest. hold switch in clasped hand and you will see it lit up,if you have rear electric windows and you find its not working dont panic check the window lock button on drivers switch pack!!

once finished you should now have nice new switches, now wait till dark and view your work!!



Link to original thread
__________________
~ Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience ~

Last edited by cumbrianmale; May 27th, 2011 at 22:34.
240 is offline  
The Following 2 Users Say Thank You to 240 For This Useful Post:
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 17:24.


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.