Carburettor Soft Mounts

Yelds · Jun 27th, 2015, 12:34

Hi everyone,
I am looking for a set of the carb' to manifold "soft mounts" (originally made by Pirelli i believe) that came with the B-18 / B20 R-Sport kit in the mid to late 1960's. (refer the pieces in the bottom left of the attached image next to the air cleaner)

The set I have are perishing and cracking. I can replace with the O-Ring type, but really want to keep the kit as it was. Anyone with a set or a lead as to where I could obtain some?

I'm also chasing an air filter element for the same kit.

thanks!

Ashley

amazon69 · Jun 27th, 2015, 21:49

They look a lot like these.

Which are for a nissan, part number 16174-25501. You'd have to double check the measurements etc though.

hth

d

Yelds · Jun 29th, 2015, 01:08

Thanks!
That's perhaps as near as I'll get. Seems quite a few sources list them (approx $30 each).
One site had some detail about ID:
https://www.nissanusa.com/nismo-web/...talog-2010.pdf

16174-25501* ALL 4/6 Carburetor insulator, 44mm bore, fits Mikuni and Weber side draught. Studded to fit various manifolds.

cheers,

Ashley

Jun 27th, 2015, 21:49	#2
amazon69 Premier Member Last Online: May 30th, 2024 09:29 Join Date: Jan 2006 Location: Falmouth	They look a lot like these. Which are for a nissan, part number 16174-25501. You'd have to double check the measurements etc though. hth d __________________ Falmouth, Cornwall. 1970 California white 131.

Jun 29th, 2015, 01:08	#3
Yelds New Member Last Online: Aug 31st, 2015 13:41 Join Date: Jun 2015 Location: Sydney	Carb' soft mounts / insulators Thanks! That's perhaps as near as I'll get. Seems quite a few sources list them (approx $30 each). One site had some detail about ID: https://www.nissanusa.com/nismo-web/...talog-2010.pdf 16174-25501* ALL 4/6 Carburetor insulator, 44mm bore, fits Mikuni and Weber side draught. Studded to fit various manifolds. cheers, Ashley

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)