|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Problem getting gearsViews : 975 Replies : 8Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 12th, 2015, 20:39 | #1 |
New Member
Last Online: Mar 11th, 2024 12:28
Join Date: Mar 2015
Location: doncaster
|
Problem getting gears
Hi
I am having a poblem getting into 1st and 2nd gears on my V50 2.0D 2009 60000 miles, worse when cold but still hard when warm, all other gears are fine. Hard to get into 2nd then next change it will go in ok then hard again on next change. Any idea's please Thanks Nick |
Dec 12th, 2015, 20:46 | #2 |
Senior Member
Last Online: Jan 21st, 2016 19:35
Join Date: Sep 2015
Location: wirral
|
has car had work done on clutch recently ?
has issue just started or you bought it like that? |
Dec 12th, 2015, 21:05 | #3 |
New Member
Last Online: Mar 11th, 2024 12:28
Join Date: Mar 2015
Location: doncaster
|
V50 gears
Had car for ten months,it seemed ok when I got it but gradually getting worse.
Not sure about any mechanical work |
Dec 12th, 2015, 21:13 | #4 |
Senior Member
Last Online: Jan 21st, 2016 19:35
Join Date: Sep 2015
Location: wirral
|
reason I asked was if gear cables are not routed correctly you can have issue getting gears
but I would check that linkage is secure what does gear change feel like when engine is off and when engine running ...this can pin point if its a box issue or a clutch issue ...whats it like going into reverse |
Dec 12th, 2015, 21:51 | #5 |
New Member
Last Online: Mar 11th, 2024 12:28
Join Date: Mar 2015
Location: doncaster
|
V50 gears
Reverse ok
All gears ok when engine off. |
Dec 12th, 2015, 22:11 | #6 |
Senior Member
Last Online: Jan 21st, 2016 19:35
Join Date: Sep 2015
Location: wirral
|
is clutch dragging? I would bleed clutch up ...when was that done last
ps is clutch bite high up on pedal? |
Dec 12th, 2015, 22:30 | #7 |
New Member
Last Online: Mar 11th, 2024 12:28
Join Date: Mar 2015
Location: doncaster
|
No clutch drag
Pedal biting in normal position Clutch not bled while I had it. Some one had floating centre console out before I bought car as some screws were missing. |
Dec 19th, 2015, 14:22 | #8 |
New Member
Last Online: Apr 6th, 2016 12:51
Join Date: Jan 2015
Location: Derby
|
I have got a similar problem of getting the car into 2nd and reverse isn't very slick either.
Came across this thread http://www.volvoforums.org.uk/showth...gear+crunching Will give it a go tomorrow and see what happens. |
Dec 19th, 2015, 14:36 | #9 |
Senior Member
Last Online: Oct 15th, 2017 11:57
Join Date: Aug 2010
Location: paignton
|
Hi
I have the same problem first thing inthe morning gets better after about 5 min of driving. One of the master members suggested clutch friction plate sticking on the splines of the gearbox. Mark |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|