|
![]() |
|
1996 940 B230FD Estate Breaking For PartsViews : 8355 Replies : 114Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
SilverBrick Lives!
Last Online: May 7th, 2024 12:24
Join Date: Apr 2015
Location: Poynton, Cheshire
|
![]()
Well as some will know, my 1996 green brick is now deceased and I will be breaking it up for bits, as people require. So far I have someone on first refusal for the rear Nivos, springs and bumpstop set. But everything else is up for grabs.
Stuff recently replaced... Heater matrix non-ac with hoses and cable operated shutoff valve. Radiator non-ac with bung for temp switch. Front door rubber (non genuine). Anti roll bar rubbers. Front side light/indicator units. Battery. Dizzy cap. Clutch, Crank pos sensor, O2 sensor, 3 very good tyres, on 5 good alloys. New not fitted yet... Coolant temp sensor. Radiator fan switch. Front brake backplates. Front hubs, abs rings and bearing assemblies. Genuine Volvo water-pump. Spark plugs. Oil filter. Lots of good stuff on it (some that are getting harder to get hold of), usual engine stuff ICV, AFM, ECU, EGR, headlight washer motors the list goes on. Front bodywork is straight, but lacquer is peeling. |
![]() |
![]() |
![]() |
#2 |
Volvologist
Last Online: Dec 6th, 2023 11:13
Join Date: Aug 2008
Location: Bangor - Norn Iron
|
![]()
How much for the front brake back plates? Post to NI please BT19
__________________
What's the matter with the car I'm driving? Can't you tell that it's out of style? Should I get a set of white wall tires? Are you gonna cruise the miracle mile? |
![]() |
![]() |
![]() |
#3 |
Master Member
Last Online: Jul 13th, 2019 10:01
Join Date: Mar 2009
Location: Derby
|
![]()
could you tell me if the ecu is a 935 or 937 or something else?
__________________
Back in the game! |
![]() |
![]() |
![]() |
#4 |
SilverBrick Lives!
Last Online: May 7th, 2024 12:24
Join Date: Apr 2015
Location: Poynton, Cheshire
|
![]()
This is what the ecu has on it.
![]() |
![]() |
![]() |
![]() |
#5 |
SilverBrick Lives!
Last Online: May 7th, 2024 12:24
Join Date: Apr 2015
Location: Poynton, Cheshire
|
![]() |
![]() |
![]() |
The Following User Says Thank You to GreenBrick For This Useful Post: |
![]() |
#6 |
SilverBrick Lives!
Last Online: May 7th, 2024 12:24
Join Date: Apr 2015
Location: Poynton, Cheshire
|
![]()
Not sure why I said it was a 1996, it's a 1995 M reg. Sorry. Can someone change the title for me, or tell me how to? Cheers
|
![]() |
![]() |
![]() |
#7 |
Master Member
Last Online: Jul 13th, 2019 10:01
Join Date: Mar 2009
Location: Derby
|
![]()
sorry matey, that number is no good to me. you need to take it out of the cage and find the other number
__________________
Back in the game! |
![]() |
![]() |
![]() |
#8 |
SilverBrick Lives!
Last Online: May 7th, 2024 12:24
Join Date: Apr 2015
Location: Poynton, Cheshire
|
![]()
OK, no probs, will do that later.
|
![]() |
![]() |
![]() |
#9 |
SilverBrick Lives!
Last Online: May 7th, 2024 12:24
Join Date: Apr 2015
Location: Poynton, Cheshire
|
![]()
Another thing I found, I have got...
A brand new inlet manifold gasket. |
![]() |
![]() |
![]() |
#10 |
Master Member
Last Online: Jul 13th, 2019 10:01
Join Date: Mar 2009
Location: Derby
|
![]()
nice one. its the number above the barcode
![]()
__________________
Back in the game! |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|