dog dish flywheel

[classicswede]

Originally Posted by snook940

I am converting from a M46 to a M90 gearbox on a 940 2.3Ft. My local Volvo dealer does not show a pilot bearing or spigot bearing for the clutch input shaft in his data base.

Am I correct in assuming that there is a required pilot bearing for the M90 and that it is likely a different shaft diameter that the M46 gearbox?

It is possible to run the m90 without a bearing. The shaft is too short to reach to where the bearing is fitted in the crank and to make it work you need to make up a new holder

[snook940]

Thank you for your reply. I am ordering a clutch kit for a Single mass flywheel to work with the M90 gearbox, but I am not coming up with the correct part number for the pilot bearing for a B230FT

[snook940]

Thank you for your reply. I am ordering a clutch kit for a Single mass flywheel to work with the M90 gearbox, but I am not coming up with the correct part number for the pilot bearing for a B230FT