School me in the diesel clutch set up... - Page 8

Derek UK · Aug 18th, 2015, 23:06

Normally there has to be a small clearance between the push rod and the arm, so increasing the length wouldn't work. You may be able to do a small adjustment at the pedal end on the push rod there.

DomF1 · Sep 22nd, 2016, 16:05

Bit of a thread resurrection but wanted to know if those pictures are hosted anywhere else? I'm looking to change my clutch to the diesel set up this looked like the perfect how to!

Ashc · Sep 25th, 2016, 07:40

Quote:

Originally Posted by DomF1

Bit of a thread resurrection but wanted to know if those pictures are hosted anywhere else? I'm looking to change my clutch to the diesel set up this looked like the perfect how to!

They are all on page 4 of this thread, if you're signed into the forum.

snook940 · Oct 5th, 2016, 00:09

I have a M90 that I would like to use to replace a M46 gearbox. My concern is that since the input shaft on the M90 is shorter than the M46, then either the M90 does not use a Pilot bearing or it is a raised bearing.

My Volvo dealer does not have anything in his parts data base on a pilot bearing for later models. I s there a part number for a pilot bearing that goes with the M 90 gearbox?

barkster1971 · Oct 23rd, 2019, 08:56

On ebay, luk clutch kit £116.

classicswede · Oct 23rd, 2019, 19:48

Quote:

Originally Posted by snook940

I have a M90 that I would like to use to replace a M46 gearbox. My concern is that since the input shaft on the M90 is shorter than the M46, then either the M90 does not use a Pilot bearing or it is a raised bearing.

My Volvo dealer does not have anything in his parts data base on a pilot bearing for later models. I s there a part number for a pilot bearing that goes with the M 90 gearbox?

The M90 does not use a pilot bearing

griston64 · Oct 23rd, 2019, 21:54

Think this thread should be renamed Lazarus

petercz · Jul 8th, 2020, 20:40

Does anyone know what's the thickness of a new (diesel) clutch disc?

TonyS9 · Jul 9th, 2020, 11:41

From memory it should be about 7.5mm clamped. 8.5mm will not work well.

Oct 23rd, 2019, 08:56	#75
barkster1971 VOC Member Last Online: Apr 12th, 2024 16:38 Join Date: Jun 2009 Location: Swineshead/Salford	Ebay On ebay, luk clutch kit £116. __________________ new engine! new car!

Oct 23rd, 2019, 21:54	#77
griston64 Premier Member Last Online: Today 19:30 Join Date: Jul 2012 Location: Lenzie	Think this thread should be renamed Lazarus __________________ V70 D5 SE Geartronic 215bhp Saville Grey 2012MY 940 LPT Manual 1996 740 SE 1990

Jul 8th, 2020, 20:40	#78
petercz Member Last Online: Apr 16th, 2024 16:58 Join Date: Aug 2011 Location: CZ	Does anyone know what's the thickness of a new (diesel) clutch disc? __________________ '96 850 R, B5234T5, AW42-50LE \| '89 764 GLE, D24TIC, ZF 4HP22 '97 944 Turbo, B230FK, M90 (145kW/330NM - Vialle LPi, BTI chips, 16T@0.8bar, 3"DP+2,5"cat-back, wasted-spark, DO88 IC, Bilstein B6, lowered, dual-sways...)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Aug 18th, 2015, 23:06	#71
Derek UK VOC Member Last Online: Today 17:06 Join Date: Jul 2006 Location: Chatham	Normally there has to be a small clearance between the push rod and the arm, so increasing the length wouldn't work. You may be able to do a small adjustment at the pedal end on the push rod there.

Sep 22nd, 2016, 16:05	#72
DomF1 Member Last Online: May 29th, 2023 10:26 Join Date: Jul 2015 Location: London	Bit of a thread resurrection but wanted to know if those pictures are hosted anywhere else? I'm looking to change my clutch to the diesel set up this looked like the perfect how to!

Oct 5th, 2016, 00:09	#74
snook940 New Member Last Online: Sep 30th, 2017 23:07 Join Date: Jul 2016 Location: Los Angeles	I have a M90 that I would like to use to replace a M46 gearbox. My concern is that since the input shaft on the M90 is shorter than the M46, then either the M90 does not use a Pilot bearing or it is a raised bearing. My Volvo dealer does not have anything in his parts data base on a pilot bearing for later models. I s there a part number for a pilot bearing that goes with the M 90 gearbox?

Jul 9th, 2020, 11:41	#79
TonyS9 Premier Member Last Online: Apr 9th, 2024 21:44 Join Date: Jul 2009 Location: Holywood	From memory it should be about 7.5mm clamped. 8.5mm will not work well.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)