|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Dilemma - R reg 940 MOT failure - advice please..Views : 3576 Replies : 50Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jul 13th, 2020, 21:42 | #21 | |
Premier Member
Last Online: Yesterday 22:50
Join Date: Dec 2010
Location: Midlands.
|
Quote:
Once had fitted a unipart ball joint to get through Irish MOT. Failed after 6 months. Had to buy a new one, genuine this time and Labour! I'm also a Plumber and do not mark up items. I myself would feel dishonest! If I buy a radiator at £40, that's what the customer pays me for it. James. Last edited by volvo always; Jul 13th, 2020 at 21:48. |
|
The Following 5 Users Say Thank You to volvo always For This Useful Post: |
Jul 13th, 2020, 22:07 | #22 | |
Premier Member
Last Online: Yesterday 23:44
Join Date: May 2012
Location: Lakenheath
|
Quote:
Parts mark up as we all know is about 100% minimum, the supplier bears the brunt of the warranty costs so it's just the labour you have to foresee covering. Often that can be reclaimed from the supplier as well. Second, pressure bleed the brakes - no need to mutilate a working master cylinder - time enough for it to fail by itself later if it's going to. Then you have another repair that was nothing to do with what you did. Reputation remains intact too! Disc machining? Good luck with getting anyone to pay for that in this country! With a new pair of rear discs/shoes included in the handbrake kit for ~£75 cost, if you can convince the customer to have a handbrake kit for £150 then it gets new discs as well on the rear. This isn't a good example of why disc machining has never been popular here, the cost of new discs Vs the cost of having the old ones machined is often cheaper. I know stateside it's a different story and i suspect in NZ as well but here, not a snowballs! Depending on the garage, labour to the victim - errrrr, customer, is from about £40/hr upwards. Go to a main stealer and put a 1 in front of the 40, minimum, some places (like Porsche, BMW, Mercedes etc) have been rumoured to charge £200+/hr. Thing is, somebody always knows someone who does mechanics on the side, granted you take a chance they know what they're doing on a particularl model but nevertheless it's a considerable saving when you're looking at £Stupid/hr for labour and there's a good chance they've done it right. That said, i've known of a lot of Honda/Rover models where the rear calipers have been wrecked because someone didn't follow the procedure correctly resulting in new calipers, new pads and new discs to rectify the situation. The oil leak is probably the PCV system blocked, clean it out, runs it with some ATF-U in with the engine oil and then do an oil/filter change substituting the first 0.5L of engine oil with ATF-U and then top up with semi-synth 10W40, should be good to go. Possible it's cam seals or maybe cam cover gasket but check the simple, easy stuff first.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
The Following 2 Users Say Thank You to Laird Scooby For This Useful Post: |
Jul 13th, 2020, 22:28 | #23 |
Master Member
Last Online: Oct 8th, 2022 22:22
Join Date: Sep 2016
Location: Auckland
|
I was managing a VW/Audi second tier workshop in SW6 in the 1980s - it was a licence to print money at those % markups.
In fact it was very similar to what working on a x40 series would be now. It was mostly air-cooled VW stuff so 10 to 25 years old (or more) then, unobtainium parts ex the dealers but lots of second level vendors, and a simple but unusual mechanical design that meant other workshops would pass the work on. Auto engineering is a near-zero cost of entry business. If the costs are considered too high, customers have options and the market allows new businesses ot set up easily. Costs are largely well contained in this environment. |
The Following 3 Users Say Thank You to aardvarkash10 For This Useful Post: |
Jul 13th, 2020, 22:57 | #24 | |
Premier Member
Last Online: Yesterday 23:44
Join Date: May 2012
Location: Lakenheath
|
Quote:
With the advent of t'internet, things have changed considerably. Back then you had Swedish and German advertising in car magazines, mostly mail order - you sent them a letter with what you wanted, they phoned you for your card details or you included a cheque with your order, you got the parts 28 days later. Fast forward 20-30 years and Swedish & German have become GSF (German, Swedish and French) and you can click on your computer/laptop/tablet/phone and a young lady (usually) delivers it in a van a short while later. Meanwhile you've paid by debit card or similar so all the sourcing is done in a matter of seconds, you're a bona-fide auto repair business so as per the guarantee terms it's been fitted by a competent person so when it breaks, GSF cough up a replacement and something for your time fitting it and you fit the replacement. Meanwhile Joe Pubic has got hold of GSFs web address and found the part you charged £99.99 for is in fact available after their discount for £22.76 (normal cost £49.99) and has come hot-footing it into your workshop screaming and shouting and demanding to know why you're ripping him off for nearly £80! Then the word goes round you're a rip-off merchant, a scammer and a general dropkick and you're business is gone before you know it.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
|
The Following 2 Users Say Thank You to Laird Scooby For This Useful Post: |
Jul 13th, 2020, 23:48 | #25 |
Master Member
Last Online: Oct 8th, 2022 22:22
Join Date: Sep 2016
Location: Auckland
|
^concur Dave.
Pity I can't do the same with my dentist. |
The Following 3 Users Say Thank You to aardvarkash10 For This Useful Post: |
Jul 14th, 2020, 00:10 | #26 |
Premier Member
Last Online: Yesterday 23:44
Join Date: May 2012
Location: Lakenheath
|
What's a dentist?
Seriously though, i have an intense phobia of them, last time i was sat in a waiting room (not even going in, just waiting) i had a major panic attack, ran out as if the hounds of hell were chasing me turning all the colours of the rainbow plus a few others nobody could describe, shaking, sweating, heart racing, sweaty palms - the list goes on. That was 15+ years ago now, time before that was 30+ years and i wasn't quite so bad but the dentist threw a sickie the day i was meant to have my wisdom teeth out. The phobia has just got worse from then but it started as a kid. These days i could probably have the dentist concerned done for assault on a minor but back then it wasn't even heard of.
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
The Following 4 Users Say Thank You to Laird Scooby For This Useful Post: |
Jul 14th, 2020, 06:56 | #27 |
Junior Member
Last Online: Jun 22nd, 2023 10:12
Join Date: Mar 2019
Location: Taunton
|
940
Not quite sure how people are comparing paying a business and doing it yourself, some people are not at all inclined or indeed have the spare time to do so, like everything in life get a 2 or 3 quotes, as for people saying euro car parts are cheap, you are joking, I have been in the motor trade for over 25 years & there are plenty of motor factors with honest pricing, euros are all about highly inflated prices with discount codes that still end up expensive, they started out cheap but have not been for quite some time.....
|
The Following 4 Users Say Thank You to mopedmick For This Useful Post: |
Jul 14th, 2020, 08:27 | #28 |
Torquemeister
Last Online: Today 08:36
Join Date: Dec 2004
Location: Asgard, Cheshire
|
My local independent charges around £45p/h and is quite happy for me to source parts for the Valdez, not least because it saves him time (which equals money), and many other similar garages may also do likewise.
Main dealers have larger overheads - often flashy premises, certainly the latest diagnostic kit, possibly even bespoke uniforms. Back in the 1980s I knew of one Scottish dealership that had franchises for both Jaguar/Daimler and Rolls-Royce/Bentley. The same mechanics, sorry "service technicians", worked on both families, but those whose Rolls-Royce was serviced paid double what the Jaguar owner paid per hour. The only difference was the overalls, and presumably a time element for exhanging Jaguar for Roll-Royce had to be factored in!
__________________
loki_the_glt - Skipper of the Exxon Valdez, driver of Sweden's finest sporting saloon - and pining for another Slant-4. |
The Following 4 Users Say Thank You to loki_the_glt For This Useful Post: |
Jul 14th, 2020, 08:35 | #29 |
Premier Member
Last Online: Today 14:19
Join Date: Sep 2014
Location: Bristol
|
I've sent a PM
|
The Following 3 Users Say Thank You to tofufi For This Useful Post: |
Jul 14th, 2020, 09:14 | #30 |
Premier Member
Last Online: Yesterday 23:44
Join Date: May 2012
Location: Lakenheath
|
Nice one Jim!
__________________
Cheers Dave Next Door to Top-Gun with a Honda CR-V & S Type Jag Volvo gone but not forgotten........ |
The Following 2 Users Say Thank You to Laird Scooby For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|