|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
C70 Hall SensorsViews : 1391 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 1st, 2013, 14:14 | #1 |
Junior Member
Last Online: Nov 3rd, 2015 20:59
Join Date: Nov 2013
Location: Cardiff
|
C70 Hall Sensors
I've connected up vida on my C70, the "load assistance" feature doesn't work on my car. It's showing up as a hall sensor, number 3. This is located behind the passenger side rear door card (if the car had rear doors). Due to the location i'm speculating it's unlikely to be a wiring fault (as that loom won't be subject to movement like with the other sensors). I'm thinking it's probably the sensor itself.
My question is, how much are these sensors typically from Volvo? Are all the hall sensors on the C70 roof the same? Anyone have a part number? Also, how are they fitted, it wasn't clear on the workshop manual if they had a removable connection or if they needed the loom cut and then re-wired. If I need to rewire, can they be soldered or am I best to use connectors? I have heard that soldering can change the resistance sometimes which can give issues. |
Dec 2nd, 2013, 11:48 | #2 |
Junior Member
Last Online: Nov 3rd, 2015 20:59
Join Date: Nov 2013
Location: Cardiff
|
Spoken to Volvo, the part number is 1385262. Not cheap at £95 VAT.
Has anyone ever had a good look at one, got any part numbers from the manufacturer? |
Jun 26th, 2014, 22:35 | #3 |
New Member
Last Online: Sep 24th, 2014 03:31
Join Date: Jun 2014
Location: Adelaide
|
How did you go with fix? I have same problem including roof not closing after pressing the button and roof failure message displaying. Mine also does not start on first attempt after pressing the button, but it does "fix" itself after about 5 mins.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|