|
ETM Issues Discuss issues regarding the problems with ETMs fitted to Volvo cars. |
![]() |
|
ETM - Latest ETM & Volvo UK Info + Pricing/ContactlessViews : 5179 Replies : 7Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
C70 T5
Last Online: Mar 23rd, 2022 21:00
Join Date: Sep 2006
Location: Midlands
|
![]()
The ETM has failed on one of my C70's.
In desperation I will be going to the old MRG Volvo site in Chippenham to get a new one fitted. I was advised that Volvo UK no longer pay the labour the for this this work and that this good will gesture was terminated in 2006 ![]() PARTS COST Replacement ETM Gasket Software The above is costing me £234 LABOUR COSTS This will vary from dealer to dealer depending on what their rates are but allow for 2 hours labour time. In my case this will be £200 bringing my payable total for an ETM to £434! Not nice for something that could only last a very short time. CONTACT REPAIRS XEMODEX has been mentioned in another thread and I am considering this for the failed ETM which I will be keeping upon removal. Also there are a number of contact-less sensors advertised on Ebay for around £75-80. Does anyone have any experiences with these?
__________________
2000 C70 T5 GT Coupe 1998 S70R / 1995 Toyota Supra Twin Turbo 2007 Mercedes CLS 320 CDI / 2011 Mercedes S350 Bluetec 2007 Suzuki GSXR-1000 |
![]() |
![]() |
![]() |
#2 |
VOC Member
Last Online: Apr 25th, 2019 21:46
Join Date: Sep 2010
Location: Scottish Borders
|
![]()
My V70 is is the same situation (though not completely failed yet), so I will be following this thread closely.
Trying to work out the best option. What kind of warranty do you get from the dealers, if any?
__________________
Previous:98 V70XC Turbo,98 v70 2.5 10v, 87 744, 86 745, 94 945, 95 944, 96 850 T5, 95 945 se turbo, 95 965 3.0 24v, 97 v40 2.0i (and wishing i could have them all back...) |
![]() |
![]() |
The Following User Says Thank You to Bartman For This Useful Post: |
![]() |
#3 |
Junior Member
Last Online: Jul 1st, 2020 17:12
Join Date: Jun 2015
Location: Didcot
|
![]()
I am amazed I don't see any further responses to this thread. Like DSK, I had mine replaced in 2014 by an independent specialist in Wantage, Oxfordshire near me, who had to take it to Volvo to get the part and have it programmed. Total cost was very similar.
Five years and 49,000 miles further...guess what? Groundhog day! I can't bear to part with the old girl; she's only done 188,000 miles and with the LPG conversion routinely returns the equivalent of almost 58mpg compared to the cost of petrol. I'm a retired electronics engineer so the mods required to fit a Sacer unit (the contactless device) are not a problem for me. The parts are on eBay for £76, which is acceptable. So has anyone else experience of doing it, or am I in uncharted waters? I doubt it. Speak up chaps! Please? ![]()
__________________
Previously: Honda CR-V, Jaguar XJ8, XK8 , Vauxhall Zafira, Several Honda Civics, Golf GTI Cabrio, Fiestas and old Minis |
![]() |
![]() |
![]() |
#4 |
VOC Member
Last Online: Apr 24th, 2024 13:41
Join Date: Dec 2003
Location: Grays
|
![]()
If you can install a Sacer yourself this will save £80 but please be aware that these throttle bodies can fail for other reasons as mine did recently. A full Vida check is a wise first move to confirm it is indeed the position sensor fault.
Have look at my post, it's the one below this. John
__________________
This is a Bike friendly Volvo-N.A.B.D. member 2000 V70R AWD - SWMBO 2017 XC60 D5 AWD --- Previous - 2009 V50 D5 SE LUX - 2000 V40 SE 2.0 - 1986 760 GLE 2.8 |
![]() |
![]() |
![]() |
#5 |
Junior Member
Last Online: Jul 1st, 2020 17:12
Join Date: Jun 2015
Location: Didcot
|
![]()
Well I do have a Vida unit, but I lost all the instructions so had to sort out again (all done now), so I ran the ETM test which came back fine (only 1.6 difference).
However, whilst running tests and familiarising myself with Vida, the problem re-appeared and I managed to graph it. Not sure if it helps, but screenshot attached. does Vida save this stuff somewhere so you can re-visit? I also seem to have hundreds of fault codes recorded from all kinds of things that have happened in the past 5 years. Is it possible to see just the latest ones or should I clear down the lot so I can get a clearer picture? What else could be causing the erratic running? I have ordered a new MAF sensor, as they are cheap enough, and will see if that makes a difference.
__________________
Previously: Honda CR-V, Jaguar XJ8, XK8 , Vauxhall Zafira, Several Honda Civics, Golf GTI Cabrio, Fiestas and old Minis |
![]() |
![]() |
![]() |
#6 |
VOC Member
Last Online: Apr 24th, 2024 13:41
Join Date: Dec 2003
Location: Grays
|
![]()
I suggest you clear all the codes and redo the diagnostic check and note the current codes. The Vida ETM test operates the throttle butterfly from closed to fully open 3 times and records the position sensor outputs but these will be almost identical if you already have Sacer fitted. The graph should show 3 similar parabolic shaped curves as the throttle opens and closes. I did mine with the ETM removed and visible as I did the test, in my case the throttle did not move during the test so I knew it was either the motor or the circuit board inside.
I would expect Vida to identify a Maf fault but I am not a Vida expert. John
__________________
This is a Bike friendly Volvo-N.A.B.D. member 2000 V70R AWD - SWMBO 2017 XC60 D5 AWD --- Previous - 2009 V50 D5 SE LUX - 2000 V40 SE 2.0 - 1986 760 GLE 2.8 |
![]() |
![]() |
The Following User Says Thank You to upv5 For This Useful Post: |
![]() |
#7 |
Junior Member
Last Online: Jul 1st, 2020 17:12
Join Date: Jun 2015
Location: Didcot
|
![]()
Hi John, you seem really helpful and knowledgeable, so I've aimed this at you, or anyone else with this skill level.
So yesterday morning I tackled the ETM replacing the main moving part with an electronic Sacer unit (I am a biomedical electronics engineer, with a pretty high level of mechanical skill from working on IV pumps and similar). I used the basic instructions that I found online, and did not have the information about voltage testing, so I might tear it all open again to take measurements and possibly re-adjust the magnet. Everything came apart nicely and went together well, and a short trip around the block was enough to convince me that I could re-pot the connections and seal it up fully, which I did. However, at the end of a 30 minute round trip yesterday evening, the car was worse than I have ever experienced. Lots of surging whilst sat at traffic lights, making me sound like a boy-racer, then it stalled on me twice, and went into limp home mode for a while. I am thinking I have not found the true cause of the problems. Finding more information online with voltage measurements last night, after the job was all bolted up was annoying - but if the magnet position was badly out, surely the faults would exhibit all the time and not intermittently? I ran Vida again today and the error codes I have this morning (having cleared everything after the job) are: CEM-1A5D Communication with ETM control module signal missing CEM-DF13 CAN-H, High speed network CEM-DF16 CAN-L, high speed network ECM-902A Communication with throttle unit- Faulty Signal Now I'm scared to take it out at busy times or for longer trips until I can remedy this. Has anyone any ideas or suggestions? Seen this before maybe? I replaced the MAFS in December, as that was the cheapest item in the chain, but that made no difference. And in the cold the car is idling perfectly, and throwing no fault codes. Paul
__________________
Previously: Honda CR-V, Jaguar XJ8, XK8 , Vauxhall Zafira, Several Honda Civics, Golf GTI Cabrio, Fiestas and old Minis |
![]() |
![]() |
![]() |
#8 |
VOC Member
Last Online: Apr 24th, 2024 13:41
Join Date: Dec 2003
Location: Grays
|
![]()
The graph you showed certainly indicates a fault, normally it would show a parabolic curve as the throttle goes from closed to open then closed again repeated 3 times. It is easier to see what is happening if the ETM is removed and placed so you can see the butterfly move while the test proceeds.
From what you have said, and the codes it looks to me like your problem is on the motor/circuit board side of the ETM as my own one was. It could also just be a bad connection or broken wire. I'm afraid that is about the limit of my knowledge on this subject. John
__________________
This is a Bike friendly Volvo-N.A.B.D. member 2000 V70R AWD - SWMBO 2017 XC60 D5 AWD --- Previous - 2009 V50 D5 SE LUX - 2000 V40 SE 2.0 - 1986 760 GLE 2.8 |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|