|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
lack of powerViews : 1915 Replies : 26Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Apr 17th, 2012, 18:02 | #1 |
New Member
Last Online: Jun 11th, 2013 17:33
Join Date: Apr 2012
Location: gateshead tyne & wear
|
lack of power
Hi all,
i'm new today to the voc forum, my name is marc and i would appreiciate some help or advice if possiple please. i have recently purchased an 850 estate the 2.5 10v, which seems to be lacking in acceleration and power. i have changed all the relevant service parts, oil filter, air filter, fuel filter, spark plugs but the car still seems flat. i have never owned an 850 before but have had a v40 2.0 which was rapid compared to this. is this common in the 850 to be honest i was expecting a bit more oomph as i have desired an 850 for quite some time. any advice? thanks. Last edited by marc850; Apr 17th, 2012 at 19:01. |
Apr 17th, 2012, 20:17 | #2 |
VOC Member
Last Online: Apr 20th, 2024 18:56
Join Date: Jun 2006
Location: Selby, North Yorkshire
|
Well the B5252S engine isn't the quickest out of the blocks, but it should be fairly lively.
Is the car manual or auto? Check that the handbrake is releasing OK. Also, have a look at the temperature gauge. It should reach the midpoint quite quickly (within a mile or two from cold) and then sit there, regardless of the driving conditions. If not your thermostat is shot, and this can certainly affect performance. Just last week I found out the hard way that a poor connection between the temp sensor and the wiring loom (the connector is hidden behind the power steering tank) was enough to make mine feel a bit stodgy until the engine started to warm up. If the plug leads, rotor and distributor cap are tired that'll affect things. I've found with my car that these need to be changed every 100k miles or so. It is possible simply to clean up the dissy cap contacts and the tip of the rotor, but if the ones on there have done a big mileage then it's as easy just to fit new. Make sure too that the tyres are correctly inflated! Hope that gives a few pointers. Cheers Jack |
The Following User Says Thank You to capt jack For This Useful Post: |
Apr 17th, 2012, 20:41 | #3 | |
Master Member
Last Online: Oct 20th, 2023 12:15
Join Date: Jun 2006
Location: Expat in NW France
|
Quote:
Capt Jack has nailed it I think. The only other thing I can think of to check out is the MAF sensor.
__________________
Quick, someone flog me a V70 before I jump ship again |
|
The Following User Says Thank You to catflem For This Useful Post: |
Apr 18th, 2012, 00:43 | #4 |
New Member
Last Online: Jun 11th, 2013 17:33
Join Date: Apr 2012
Location: gateshead tyne & wear
|
Thanks guys i will certinately have a look at the distributor cap and leads as this seems like an easy fix, what about the maf sensor tho' where would i find that? and what sort of difference would it make (what does it do should i ask ?) should the 850 2.5 10v be quite keen on the throttle and how does it compare to the other models like the 20v or the GLT etc? i wasn't expecting a rocket, but a little more give without having to hammer down the accelerator pedal which doesn't do my mpg any good i've noticed.
Sorry forgot to mention the car is manual, not keen on autos as i know they can be a little less responsive. Last edited by marc850; Apr 18th, 2012 at 00:47. Reason: forgot to ad |
Apr 18th, 2012, 17:39 | #5 | |
New Member
Last Online: Jun 11th, 2013 17:33
Join Date: Apr 2012
Location: gateshead tyne & wear
|
Quote:
Cheers. |
|
Apr 18th, 2012, 18:32 | #6 |
Junior Member
Last Online: Sep 9th, 2012 19:47
Join Date: Mar 2012
Location: aylesbury
|
I second capt jack, I had exact same probs on my v70 10v, after changing the obvious turned my attention to thermostat and ect sensor.
The car was juddering very badly from cold and had slight misfire under load when warm and felt "restricted" I replaced both thermostat and ect and have noticed a difference immediately, like a new car! |
The Following User Says Thank You to stuv7010v For This Useful Post: |
Apr 26th, 2012, 17:20 | #7 |
New Member
Last Online: Jun 11th, 2013 17:33
Join Date: Apr 2012
Location: gateshead tyne & wear
|
Hi
You mentioned an ect sensor whats this, and where would i find it? also roughly how much of a difference did it make combined with the thermo on performance and mpg? Cheers Marc sorry that was directed to stuv7010v, still learning with this forum business ha! Last edited by marc850; Apr 26th, 2012 at 17:33. |
Apr 26th, 2012, 17:25 | #8 | |
New Member
Last Online: Jun 11th, 2013 17:33
Join Date: Apr 2012
Location: gateshead tyne & wear
|
Quote:
How much of a difference did you notice on power, acceleration and mpg? what is the ect sensor? (sorry if i seem thick, but i need to know these things, and i'm no mechanic! but trying) Cheers Marc |
|
Apr 18th, 2012, 20:38 | #9 |
Master Member
Last Online: Oct 20th, 2023 12:15
Join Date: Jun 2006
Location: Expat in NW France
|
Oops, I didn't read your engine spec properly......... I don't think the 10V has a MAF.
__________________
Quick, someone flog me a V70 before I jump ship again |
The Following User Says Thank You to catflem For This Useful Post: |
Apr 18th, 2012, 20:52 | #10 |
VOC Member
Last Online: Apr 20th, 2024 18:56
Join Date: Jun 2006
Location: Selby, North Yorkshire
|
Not a MAF but it will have a MAP sensor, tucked just above the radiator with a couple of electrical connection and a vacuum pipe. There'll also be an air inlet temp sensor in the inlet air trunking between the air filter box and the throttle body.
The ECU has to work out how much air is coming into the engine. On a car with a MAF sesnor system, it does this by measuring air flow MAF = mass air flow. On a car with a MAP sensor it does this by measuring the the Manifold Absolute Pressure and then using information about the air temperature to calculate the mass of air. This in turn is used to work out how much petrol to squirt through for the calculated amount of air. Sounds complicated but it's actually quite straightforward and generally reliable. If something's amiss however, you'll get problems of either under- or over-fuelling and the engine will misbehave. Faults should throw a code and light up the engine management light. I reckon a Haynes book would be a good investment to help you find your way around the engine bay. Cheers Jack One last thing - make sure the throttle cable can move freely. They do rust up once the plastic sleeving starts to deteriorate. An easy fix to replace - but if it is a bit grotty try running some oil down the cable first! Jack Last edited by capt jack; Apr 18th, 2012 at 20:55. |
The Following User Says Thank You to capt jack For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|