|
PV, 120 (Amazon), 1800 General Forum for the Volvo PV, 120 and 1800 cars |
Information |
|
Epoxy removalViews : 640 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 23rd, 2010, 21:18 | #1 |
New Member
Last Online: Jan 6th, 2011 20:43
Join Date: Apr 2009
Location: Easton, MA
|
Epoxy removal
My 122 has been coated with what appears to be epoxy and fiberglass all around the gas tank and spare tire area. Most of the metal underneath is solid, but evidently the previous owner thought that it would look better if it was continuous. Is there a way to get this off besides grinding?? This is disgusting since I now have no access to the fuel tank screws and do not want to destroy the mounting areas.
Secondly, it appears as if the panel below the trunk lid (above bumper) is no longer available. I would rather pay than fabricate something so complex................ Happy holidays everyone. THis site has been a great resource. |
Dec 23rd, 2010, 21:46 | #2 |
Premier Member
Last Online: Yesterday 23:59
Join Date: Jul 2007
Location: Connecticut, USA
|
Topperch;
If it is indeed epoxy, there is little which will touch it chemically (that's what the fuel tank repair kits use), so mechanical attack/grinding is about the only thing which will make an impression on it...if however the less expensive polyester resin was used, chemical strippers or acetone might soften it...I'd try a test area... Good Hunting from Connecticut! |
Dec 23rd, 2010, 21:54 | #3 |
Senior Member
Last Online: Nov 14th, 2016 01:07
Join Date: Feb 2007
Location: essex
|
try paint stripper it ruined my mates TVR bloody vandels
|
Dec 24th, 2010, 13:46 | #4 |
New Member
Last Online: Jan 6th, 2011 20:43
Join Date: Apr 2009
Location: Easton, MA
|
Thanks..... Panel???
Thanks guys
I'll try some acetone before I do the Christmas thing................. Is the panel below the trunk available anywhere? |
Dec 24th, 2010, 16:16 | #5 |
VOC Member
Last Online: Aug 12th, 2015 14:44
Join Date: Dec 2001
Location: sunderland
|
epoxy resin removal
|
Dec 27th, 2010, 16:49 | #6 |
New Member
Last Online: Jan 6th, 2011 20:43
Join Date: Apr 2009
Location: Easton, MA
|
Great link
Great link. A very interesting site. I noticed an old hardware store near me had MEK on the shelf. I remember using it in a printed circuit lab (way back) when Iwas in College. Nasty stuff. I need to get the gas tank screws free and this sounds like the way.
__________________
66 122S, 1980 TR8, '97 Blazer 4wd, 05 Mini S Total value: Not much - but they are all fun |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|