|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
2003 XC90 T6 intermitted won't start,new starter & batteryViews : 3710 Replies : 42Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 24th, 2018, 14:17 | #41 |
New Member
Last Online: Jun 28th, 2018 19:37
Join Date: Jun 2018
Location: NY
|
Starter Cranks When Jumped To pin 86 at starter relay
UPDATE: OK, ran jumper wire from starter trigger lug to starter relay pin 86 and starter turns over, so not starter, but it will not start like others said they could do with same jumper, ignition was on, even tried it while starter was spinning to turn key to start, nothing. So is ignition switches common problem of no start? Will check wiring to ignition, or does a failed halo cause a no start issue, I heard these don't usually go bad, any input, did connect and clean with electronic spray in case of connection issue which many reported. Any other suggestions?
Thanks |
Aug 21st, 2018, 07:24 | #42 |
Junior Member
Last Online: Oct 26th, 2023 04:22
Join Date: Nov 2011
Location: Seattle
|
Just quick update: I took out TCM/ECM and cleaned them. Start problem did not come back in the last 3 months.
|
The Following User Says Thank You to cocoli2007 For This Useful Post: |
Aug 21st, 2018, 11:11 | #43 |
Volvo Driver
Last Online: Yesterday 10:12
Join Date: Mar 2016
Location: Basingstoke
|
Great News!!
Thanks for the update. I hope you said "thank you" to Swiss?? Cheers Dave |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|