Stripping 940 turbo at weekend, parts anyone?

[Ashc]

I'd be interested in these if they're in reasonable condition.
Thanks

[clocks2003]

Hi,
Do you still have the alternator? If so, how much please, shipped to GL54 2LH?
Thanks
Andrew

[240brick]

Originally Posted by Chooch84

Not too sure about this question, but if the front subframe/crossmember unbolts and isn't too rusted, I'll have that

Got the cross member off, seems to be pretty good condition and can send you pictures tomorrow if still interested? can you pm me an email address please?

[240brick]

Originally Posted by clocks2003

Hi,
Do you still have the alternator? If so, how much please, shipped to GL54 2LH?
Thanks
Andrew

sorry, I'm keeping the engine and ancillaries

[240brick]

Originally Posted by globetrotter

Hi, is the drivers door seal any good?
Thanks

sorry it was pretty well gone

[240brick]

Originally Posted by wrinkles

are the hand break cables any good and what year is the car and model?

sorry ended up having to sacrifice the handbrake cable when removing the rear axle

[240brick]

Originally Posted by volvo always

Looking for the following for my 1996 940:

Drivers moulded foot well Volvo plastic floor tray. Preferably Grey or black. Mine missing when purchased car.

Passenger grey door pocket. Mines broken.

Ac clamp. connects the 2 pipes to condenser. Notched with bolt in centre.

possible Wood effect dash.

Many thanks. James.

door pocket has been removed and is in good condition. Also air con pump is still fitted to engine so should have that clamp for you. Unfortunately no plastic floor tray or wood dash trim

let me know if you're interested in the pocket etc and I'll pm you with details

[240brick]

Originally Posted by rwdkev

Do you still have the twin horns? If so do they still work?

Kevin

sorry horns were missing and replaced with single cheapo aftermarket

[240brick]

Originally Posted by Ian21401

What year is the car please and does it have the early pattern seat belt buckle release buttons? ( the ones with the squarer corners ).
If so could I have the rear seat belt buckles please?

sorry later type and in pretty poor condition. managed to salvage mechanical parts but most trim etc was really grim

[rwdkev]

Originally Posted by 240brick

sorry horns were missing and replaced with single cheapo aftermarket

Thanks for getting back to me.