Volvo Community Forum. The Forums of the Volvo Owners Club

Forum Rules Volvo Owners Club About VOC Volvo Gallery Links Volvo History Volvo Press
Go Back   Volvo Owners Club Forum > "Technical Topics" > C30 / S40 & V50 '04-'12 / C70 '06-'13 General

Notices

C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models

Information
  • VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
  • AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
  • AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Slave cylinder- voiding warranty on flywheel and clutch

Views : 147

Replies : 1

Users Viewing This Thread :  

Reply
 
Thread Tools Display Modes
Old Jan 14th, 2022, 12:52   #1
Tamejoca
New Member
 

Last Online: Jan 21st, 2022 20:17
Join Date: Jan 2022
Location: Bournemouth
Default Slave cylinder- voiding warranty on flywheel and clutch

Hi
I had the clutch and dual mass flywheel replaced in August 21. Clutch went and garage advised to do dual mass flywheel.

Just before Xmas slave cylinder went.

The garage have called today to say that the slave cylinder has caused damage so need to replace the clutch and flywheel again. They say the parts are not under warranty as the providers say that the damage is caused by slave cylinder- therefore their parts are not defective and not covered.

Garage says they are arguing with parts provider and waiting for decision. It will take 30 days so they recommend paying and if appeal is successful they will refund. Otherwise car sits as is (half done).

Is this correct? RAC mechanic said they should have replaced slave cylinder when they did clutch and flywheel but I don’t know

Anyone here know where I stand? It is a C30 November 2009 with about 105000 miles
Tamejoca is offline   Reply With Quote
Old Jan 15th, 2022, 12:48   #2
ele288
Junior Member
 

Last Online: Jan 15th, 2022 12:59
Join Date: Jun 2019
Location: Havant
Default

In my view the slave is always part of the clutch job, just like water pump with cambelt. Don't see why they would push for dmf replacement, the only part that is contaminated with brake fluid is the clutch that has obsorbed the fluid. I would replace just slave and clutch without dmf or pressure plate just clean them with cleaner to remove any trace of the brake fluid.
ele288 is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 00:15.


Powered by vBulletin
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.