S40: - cam sensor wire colour code/ not starting

		Volvo Owners Club Forum > "Technical Topics" > S40 / V40 '96-'04 General
S40: cam sensor wire colour code/ not starting

S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004.

VOC Members: There is no login facility using your VOC membership number or the details from page 3 of the club magazine. You need to register in the normal way
AOL Customers: Make sure you check the 'Remember me' check box otherwise the AOL system may log you out during the session. This is a known issue with AOL.
AOL, Yahoo and Plus.net users. Forum owners such as us are finding that AOL, Yahoo and Plus.net are blocking a lot of email generated from forums. This may mean your registration activation and other emails will not get to you, or they may appear in your spam mailbox

Thread Informations

Replies : 0

Users Viewing This Thread :

Thread Tools

Aug 14th, 2017, 07:07	#1
interceptorv8 New Member Last Online: Oct 9th, 2019 13:08 Join Date: Aug 2017 Location: krugersdorp	cam sensor wire colour code/ not starting Hi Guys I am new to the scene. I purchased a non runner 2004 S40 2.5 turbo the head was off. I had the head re done,gaskets etc. The cam timing is right but the cam sensor plugs are gone.I only have the wires with pins. Colours : red/yellow +white /purple + brown white the other yellow/brown +black/white +yellow/black. I tested found 4.86v +5.0v and earth on one set, the other set no volts. I need to know which set goes on exhaust cam sensor and which is the intake cam sensor wires.as well as pin out colours. The car started for 20 sec then cut out. would not start again,it backfired twice Thanks Steve

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)