|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Turbo boost codeViews : 321 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 28th, 2019, 18:24 | #1 |
Member
Last Online: Nov 23rd, 2019 17:04
Join Date: Mar 2016
Location: liepaja
|
Turbo boost code
Hey, lately my v50 2005 2.0d has been driving quite not the same. It seems to lack power, especially low rews. And when rews past around 3000, it shows engine service required. Stop and start, and the error is away. The code reader showed boost control (too much pressure) With what should I start? Turbo actuator? Turbo valve control?
Thanks |
Mar 1st, 2019, 11:34 | #2 |
Master Member
Last Online: Mar 14th, 2024 17:24
Join Date: Apr 2017
Location: South
|
It'll be the turbo control value, or whatever the solenoid/valve that controls the boost pressure on the 2.0D model is called
__________________
2006 Volvo S40 T5 SE Sport
|
Mar 1st, 2019, 13:21 | #3 |
Member
Last Online: Nov 23rd, 2019 17:04
Join Date: Mar 2016
Location: liepaja
|
Thanks. Its the number 1 in picture, right?
|
Mar 9th, 2019, 12:37 | #4 |
Member
Last Online: Nov 23rd, 2019 17:04
Join Date: Mar 2016
Location: liepaja
|
Today checked intercooler pipes, seems ok. Give test drive. Acceleration seems bit chunky. Driving in 3rd trying to redline it, it gets around 3k revs or over and after few seconds feels like shuts off. Got check engine light. Stop and start the car and again the same. What could be problem. No dpf, no egr.
As told it could be vacuum boost preasure solenoid. Or turbo preasure control valve actuator. By the looks on my car, they both look exactly the same, like in picture below. |
Mar 9th, 2019, 12:39 | #5 |
Member
Last Online: Nov 23rd, 2019 17:04
Join Date: Mar 2016
Location: liepaja
|
Also could someone told difference between those two (solenoid and actuator) and how to check if they are working?
Thanks |
Mar 22nd, 2019, 19:45 | #6 |
Member
Last Online: Nov 23rd, 2019 17:04
Join Date: Mar 2016
Location: liepaja
|
Changed vacuum boost preasure solenoid. Feels like car has better acceleration but problem stays the same. When driving, for example in 2nd gear and trying to redline it, it goes around 4K rews and like cuts off. In 3rd gear this happens around 3k..but if I keep throttle pedal to floor it cuts out but after few seconds cuts back and keeps going.
Also it shows engine needs service. Anyone can help? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|