Two 262 Parts wanted

[1978]

Firstly the C Pillar hockey stick type moulding for the Near Side or left rear if any one has one or know of one.

Plus a dash top for the LHD 200 series, I believe these are the same for all the 240, 262 etc. My one has cracked badly right down to the bash in many places.

Many thanks Peter

[BicycleBoy]

If they're like non-generic 240 parts, good luck getting them for a reasonable price, particularly the dash if it's different - perhaps your roof guy could do it at the same time?.
Here's something that'll blow the restoration budget real quick:
https://www.ebay.co.uk/itm/125566627195
A monkey for half a seat cover!
Forget bodywork, the real money is in upholstry...

[1978]

Originally Posted by BicycleBoy

If they're like non-generic 240 parts, good luck getting them for a reasonable price, particularly the dash if it's different - perhaps your roof guy could do it at the same time?.
Here's something that'll blow the restoration budget real quick:
https://www.ebay.co.uk/itm/125566627195
A monkey for half a seat cover!
Forget bodywork, the real money is in upholstry...

Blimey that is a bit OTT. My guess is he'll have it for a while??
The dash top is the same as all 200 series luckily.
I had a couple of Peugeot 604's and parts were all sourced from the States, nothing available UK or France.

[1978]

Just thought I would update this post.
By cleaning out a lot of rubbish out of the boot, I came across the smaller missing trim mouldings for the front wing and base of the rear pillars. Managed to buy a good used LHD dash top, now fitted.
Have arranged for the vinyl top to be fitted shortly as well.