|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Rear Parking SensorViews : 555 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Sep 9th, 2019, 07:30 | #1 |
Junior Member
Last Online: Apr 18th, 2024 15:14
Join Date: Jan 2013
Location: London
|
Rear Parking Sensor
Just swapped out third parking Sensor on rear bumper. now need to rest the "Parking Service Required" message, anybody know how to do this, I disconnected battery thought this would work, but does'nt seem to have cleared it. Thanks.
|
Sep 9th, 2019, 10:25 | #2 |
Premier Member
Last Online: Jan 15th, 2024 17:24
Join Date: Jun 2010
Location: Bury St Edmunds
|
It resets automatically if the fault is cured.
The 3rd sensor was not the problem. Read the DTC. You may find it is a wiring loom issue. Also, did you fit a genuine Volvo sensor? You can use after-market sensors as long as you replace all four. You cannot mix them.
__________________
Greg |
Sep 9th, 2019, 13:06 | #3 |
Junior Member
Last Online: Apr 18th, 2024 15:14
Join Date: Jan 2013
Location: London
|
Greg,
Many thanks, Volvo dealership said it was 3rd sensor!! Got them to check when I was getting the On Call checked for fault. Swines!! Yes to original, albeit second hand sensor, told that was working. I will check DTC (dumb question) I assume I need VIDA reader for that? Thx, again I'll report back on further findings. |
Sep 9th, 2019, 15:40 | #4 |
Volvo Driver
Last Online: Today 00:09
Join Date: Mar 2016
Location: Basingstoke
|
How are the sensors numbered?
From looking at the outside of the rear bumper or the inside? i.e. did you change #3 or #2? Cheers Dave |
Sep 10th, 2019, 00:23 | #5 | |
Petrolhead+Lots of Diesel
Last Online: Today 11:43
Join Date: Aug 2008
Location: Glasgow
|
Quote:
hope it helps
__________________
BMW X3 Msport MHEV 2020MY & VW Beetle Design 1.2Tsi DSG 2014MY Previous XC90 D5 SELux Geartronic 2009MY |
|
Sep 16th, 2019, 11:38 | #6 |
Master Member
Last Online: Apr 18th, 2024 19:47
Join Date: Oct 2016
Location: Accrington
|
Did you remove the bumper or bend the bumper back to fit ? Looking at tackling the job my self
__________________
2007 XC70 SE Lux D5 https://www.volvoforums.org.uk/showthread.php?t=305815 Previous: 2006 XC90 D5 , 2008 V50 2.0D |
Sep 18th, 2019, 16:36 | #7 | |||
Me ? Surely Not!
Last Online: Apr 5th, 2024 16:23
Join Date: Jul 2010
Location: 2007 Volvo XC90 D5 Geartronic. South of Hadrians Wall.
|
I replaced sensor no 2 on my 2007 this afternoon using the method in this video which was on YouTube and covers facelift models.
This is the item that I bought and it worked perfectly as soon as fitted. Make sure you order the correct one for your MY as there are 2 types. I reset all DTC's afterwards as a matter of course https://www.ebay.co.uk/itm/Volvo-XC9...YAAOSwO7db~oUd 3 rivets to drill out in the wheel arch and then follow the procedure. Nothing got broken or scratched and I would say 30 minutes covered the whole job including removing the wheel to give better access to rivets.
__________________
“Do the right thing. It will gratify some people and astonish the rest.” – Mark Twain 😊 2007 Volvo XC90 D5 SE Geartronic Last edited by S60D5-185; Sep 18th, 2019 at 16:41. |
|||
Tags |
parking sensors |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|