Sunroof fault XC60

Gin99 · Feb 28th, 2019, 14:35

Hi, ive searched for this problem but cant find any answers, so im hoping someone here can help.

Have a problem with the sunroof where is not opening / closing properly.
It (usually) opens to tilt, then slides 1, 2, 3, inches at a time, with the switch held on, and the same when closing.

Sometimes it just doesnt open at all, but it will often open (intermittently as above) if I switch off ignition and start again, it seems to reset something.

The shade/sunscreen doesnt open or close at all.

I have taken down the lining, and wound the mechanisms manually and they run smoothly, although with a bit of resistance, but nothing more than expected. Everything looks clean in the runners etc.

I have disconnected the front motor, and switched on and it runs the same (a second or so at a time)

I have also run a Launch x431 on it but cant find any faults or resets.

2010/11 model

I have also disconnected the battery to reset, and tried the key in/out unlock doors calibration reset and no difference.

Many thanks in advance.

Feb 28th, 2019, 14:35	#1
Gin99 New Member Last Online: Mar 12th, 2019 23:17 Join Date: Oct 2018 Location: London	Sunroof fault XC60 Hi, ive searched for this problem but cant find any answers, so im hoping someone here can help. Have a problem with the sunroof where is not opening / closing properly. It (usually) opens to tilt, then slides 1, 2, 3, inches at a time, with the switch held on, and the same when closing. Sometimes it just doesnt open at all, but it will often open (intermittently as above) if I switch off ignition and start again, it seems to reset something. The shade/sunscreen doesnt open or close at all. I have taken down the lining, and wound the mechanisms manually and they run smoothly, although with a bit of resistance, but nothing more than expected. Everything looks clean in the runners etc. I have disconnected the front motor, and switched on and it runs the same (a second or so at a time) I have also run a Launch x431 on it but cant find any faults or resets. 2010/11 model I have also disconnected the battery to reset, and tried the key in/out unlock doors calibration reset and no difference. Many thanks in advance.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)