Engine: D5: - D5 troubles.. any ideas? - Page 2

Thassos · Nov 17th, 2022, 10:36

P242F i believe is DPF full, or restriction.. has yours gone into limp mode (feels like an engine half the size and massive drop in power).. what else has happened before as the fault code is usually a result of many other things going on before you get that.. one easy to check thing is glowplugs resistance and if your having any kind of slow or rough running when cold could be glowplug related, they are also used during regen i believe so thats another side effect..

PjPZummerzet · Nov 17th, 2022, 11:22

Only had the car a week, ran fine for about 20 miles then into limp mode. I have an iCarsoft reader and it came up with low turbo so cleaned the Turbo Solenoid, MAF and Air Filter. Worked OK for a few more miles then back into limp mode with a SootParticle Filter full, so did the regen using the iCarsoft, done it a few times now and now it is throwing up the DPF error, along with EML and a few other codes (glow plugs, MAF).
I think the previous owner must have had all the codes cleared prior to me seeing it.

PjPZummerzet · Dec 18th, 2022, 15:46

Just in case anyone else has the same issues, the DPF codes and 'Soot filter full' messages were caused by a cracked turbo hose. Replaced and now all good.

Nov 17th, 2022, 10:36	#11
Thassos GoldMember Last Online: Apr 25th, 2024 22:46 Join Date: Jul 2010 Location: Kent, UK	fault code P242F i believe is DPF full, or restriction.. has yours gone into limp mode (feels like an engine half the size and massive drop in power).. what else has happened before as the fault code is usually a result of many other things going on before you get that.. one easy to check thing is glowplugs resistance and if your having any kind of slow or rough running when cold could be glowplug related, they are also used during regen i believe so thats another side effect..

Nov 17th, 2022, 11:22	#12
PjPZummerzet New Member Last Online: Jul 18th, 2023 15:42 Join Date: Feb 2019 Location: Glastonbury	Only had the car a week, ran fine for about 20 miles then into limp mode. I have an iCarsoft reader and it came up with low turbo so cleaned the Turbo Solenoid, MAF and Air Filter. Worked OK for a few more miles then back into limp mode with a SootParticle Filter full, so did the regen using the iCarsoft, done it a few times now and now it is throwing up the DPF error, along with EML and a few other codes (glow plugs, MAF). I think the previous owner must have had all the codes cleared prior to me seeing it.

Dec 18th, 2022, 15:46	#13
PjPZummerzet New Member Last Online: Jul 18th, 2023 15:42 Join Date: Feb 2019 Location: Glastonbury	Just in case anyone else has the same issues, the DPF codes and 'Soot filter full' messages were caused by a cracked turbo hose. Replaced and now all good.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)