|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
Tool to replace the upper/rear torque mount/bushViews : 267 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jan 22nd, 2019, 12:04 | #1 |
Premier Member
Last Online: Yesterday 17:43
Join Date: Oct 2004
Location: London/West Country
|
Tool to replace the upper/rear torque mount/bush
Hi all
I am replacing the upper/rear torque mount/bush on a 1998 V70 T5 Auto Part number is 9434263 Outside diameter of the cylindrical hard plastic shell is 60.1 mm - 61.6 mm (they tend to be slightly out of round), so say 60.8 mm. Length of the shell is 39.5 mm The procedure should be the same as for 1997 and 850s. I sometimes have replaced the upper rear/torque mount on these by removing the whole pressed steel bracket, and replacing it with "one I prepared earlier". You have to remove various hoses, maybe the distributor cap (I don't remember) and take care not to pinch the cam position sensor wires. Various DIY guides are available, including Robert DIYs homemade tool (not currently in stock and has to be shipped from USA). https://www.youtube.com/watch?v=8t3_5KZfRSA http://robertspinner.com/tools_services.htm https://www.matthewsvolvosite.com/re...m-bushing.html https://willkog89.wordpress.com/2013...995-volvo-850/ The various guides sometimes refer to drivers side and passenger side, which you have to translate (because the pressed steel bracket has a larger opening on one side than the other). Has anyone replaced this mount in situ, using off the shelf UK hardware? Various bearing press kits are available on ebay but it is difficult to know if they would work. I would prefer not to replace with a two part polyurethane mount, I really want to know a good technique to do this for my own satisfaction. Thanks, Steve
__________________
V70 2.5 Turbo AWD Man. 1999 Red V70 2.5 10V Auto 1998 Green C70 T 20V Auto Conv. 2001 Blue, C70 T5 Auto Conv. 2000 Blue V70 2.5 Turbo AWD Auto 1998 Green, V70 2.5 10V Auto BiFuel 1999 Red (scrapped) V70 20v Auto 1999 Green (scrapped) Last edited by SteveSarre; Jan 22nd, 2019 at 12:51. |
Jan 22nd, 2019, 15:34 | #2 |
New Member
Last Online: May 28th, 2019 09:27
Join Date: Dec 2007
Location: Oslo
|
A threaded bult and this set for making hole in tiles works just perfect for this purpose !
http://www.biltema.se/sv/Bygg/Kakel-...el-2000017325/ |
Jan 22nd, 2019, 17:03 | #3 |
Premier Member
Last Online: Yesterday 17:43
Join Date: Oct 2004
Location: London/West Country
|
Hi Lob,
OK thanks, but I was hoping for something cheaper, and more local! Steve
__________________
V70 2.5 Turbo AWD Man. 1999 Red V70 2.5 10V Auto 1998 Green C70 T 20V Auto Conv. 2001 Blue, C70 T5 Auto Conv. 2000 Blue V70 2.5 Turbo AWD Auto 1998 Green, V70 2.5 10V Auto BiFuel 1999 Red (scrapped) V70 20v Auto 1999 Green (scrapped) |
Jan 22nd, 2019, 17:41 | #4 |
New Member
Last Online: May 28th, 2019 09:27
Join Date: Dec 2007
Location: Oslo
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|