|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
Squeaking beltViews : 1109 Replies : 29Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 17th, 2024, 13:55 | #21 |
VOC Member
Last Online: Today 14:28
Join Date: Feb 2013
Location: North Yorkshire
|
There won’t be play in it! They seize solid and cause the belt to chirp/vibrate/squeal. There is a good video from Volvo Sweden on YouTube who shows you replacement. Worth a look.
__________________
Previous -03 S40, 04 V70 D5, 04 V70 D5 Sport, 05 V50, 07 S60 D5, 09 V70 D5 R design, 12 XC60 DrivE, 15 V60 D3 Current- 05 XC90 D5 Exec, 12 XC70 D4 AWD Se Lux, 14 S80 D3 Se Lux |
Feb 17th, 2024, 14:14 | #22 |
Premier Member
Last Online: Today 16:58
Join Date: Apr 2019
Location: Manchester
|
Today its 14 degrees, so the chirping isn’t as bad because it’s relatively mild. I do find its worse when its damp outside or colder.
I recorded a video on my phone. I can hear the squeak faintly, but like I said, its not bad today. Those with a keen ear may hear it, but the engine noise doesn’t help! How do I post the video here? I’ll check volvosweden’s video out.
__________________
2007 S80 2.4 D5 - 110,000 miles |
Feb 17th, 2024, 17:01 | #23 |
Premier Member
Last Online: Today 16:58
Join Date: Apr 2019
Location: Manchester
|
I watched VolvoSweden’s video. It looks like you need a special tool to remove the alternator pulley and he removed the alternator from the car… it seemed like a right faff to do that.
Could the alternator pulley be replaced in situ, i.e by not removing the alternator? If I want to test the alternator pulley, can this be done with the belt on?
__________________
2007 S80 2.4 D5 - 110,000 miles |
Feb 17th, 2024, 17:24 | #24 |
VOC Member
Last Online: Today 14:28
Join Date: Feb 2013
Location: North Yorkshire
|
You do need a tool yes but they are not exspensive. You can test the pulley in situ but you need to remove the belt.
I did not remove the alternator from the car, there is no need. I removed the drivers side wheel, peeled back the liner to access the tensioner. Removed the belt. Removed battery negative, unplugged alternator and removed power cable. Unbolted alternator and twisted it on its side. Then used an impact gun to remove the pulley with said tool. Then fitted the new pulley and tightened it on with the impact gun gently before finally torquing it. Then re assembled. Took about 45 mins. This was inside in a workshop but not on a ramp so I wasn’t battling weather etc and also had all the tools to hand. If you have done the belt and tensioner you’re more than capable of doing the pulley. Also gives you chance to inspect everything else.
__________________
Previous -03 S40, 04 V70 D5, 04 V70 D5 Sport, 05 V50, 07 S60 D5, 09 V70 D5 R design, 12 XC60 DrivE, 15 V60 D3 Current- 05 XC90 D5 Exec, 12 XC70 D4 AWD Se Lux, 14 S80 D3 Se Lux |
Feb 17th, 2024, 17:32 | #25 | |
Member
Last Online: Today 10:11
Join Date: Feb 2007
Location: Zagreb
|
Quote:
My mechanic replaced the pulley without removing the alternator (V70 D3 2013 D5204T7).
__________________
[1981...244gld6] - 1992. > 2004. [1997 ... 855tdi] - 2004. > today. [2013 ... V70d3] - 2022. > today. |
|
Feb 17th, 2024, 20:06 | #26 |
Premier Member
Last Online: Today 16:58
Join Date: Apr 2019
Location: Manchester
|
Thank you for your replies.
I need to find the correct tool to remove the pulley. Does anyone have a link to a site that has the tool? I may have found one below, but I’m not sure if it’s correct. Would this be the correct pulley? https://www.autodoc.co.uk/spares-sea...ier%5B%5D=1313 https://www.autodoc.co.uk/force/13659477 (removal tool?) I just searched for an INA pulley based on VolvoSweden’s recommendation in his video.
__________________
2007 S80 2.4 D5 - 110,000 miles Last edited by Kev0607; Feb 17th, 2024 at 20:12. |
Feb 18th, 2024, 07:48 | #27 |
VOC Member
Last Online: Today 14:28
Join Date: Feb 2013
Location: North Yorkshire
|
https://www.autodoc.co.uk/ina/2386684
That is the link for an INA branded pulley. It’s the same part no as what I fitted and that of volvoswedens video and is what I used on my S80. The tool you linked is also correct and has same part no as volvoswedens video.
__________________
Previous -03 S40, 04 V70 D5, 04 V70 D5 Sport, 05 V50, 07 S60 D5, 09 V70 D5 R design, 12 XC60 DrivE, 15 V60 D3 Current- 05 XC90 D5 Exec, 12 XC70 D4 AWD Se Lux, 14 S80 D3 Se Lux |
The Following User Says Thank You to GrahamBrown1 For This Useful Post: |
Feb 18th, 2024, 14:37 | #28 |
Member
Last Online: Today 15:54
Join Date: Dec 2018
Location: Aberdeenshire
|
Hi kev I have an ina alternator pulley same part number as above sitting in the box brand new was bought about 3 years ago for when I thought my one was gone but ended up replacing the alternator so is surplus to requirements can sell it a bit cheaper than autodoc 👍
__________________
Current: 2007 Volvo V70 D5 SE Geartronic 137,000 miles 2008 Volvo S80 D5 SE Geartronic 10,100miles Previous: 2016 Volvo V40 D4 R-Design 190bhp now Polestar to 200 bhp 40,000 miles Sold 2007 Volvo C30 T5 SE Sport 101,000 miles Sold Last edited by Adderross94; Feb 18th, 2024 at 14:44. |
Feb 28th, 2024, 16:12 | #29 |
Master Member
Last Online: Apr 10th, 2024 16:20
Join Date: Sep 2012
Location: Loughborough
|
Hi Kev
Did you get your chirping/squeak sorted ?
__________________
2008 V70 SE D5 Auto 185 ...now 205 Volvo Polestar......190k Passed away - 1999 V70 2.5tdi Auto 340632 miles, RIP. |
Feb 28th, 2024, 22:32 | #30 |
Premier Member
Last Online: Today 16:58
Join Date: Apr 2019
Location: Manchester
|
Hi,
No. Its barely audible now the weather has warmed up. It does it more when its really cold outside or if its been damp overnight. I have a video, but I don't know how to post it here. Can anyone help with that?
__________________
2007 S80 2.4 D5 - 110,000 miles |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|