Understanding codes

[Gazdkw]

So I recently scanned my car cleared all the faults and then scanned again a few weeks later.

Its come up with some amber warnings but I'm unsure if I should be worried or just to ignore them.

I would attached the photos I took of the laptop but uploading the attachment keeps failing.

The faults in red are the following. There are a load more amber warnings. Most electrical issues.

KVM-B10C200 left rear unlock pull switch

MMM-U220041 control module configuration memory corrupt. System internal failures - general checksum failure.

PDM-B116515 left front puddle lamp output. General electrical failures- circuit short to battery or open

Any help on the codes or how to successfully upload jpgs would be appreciated

[100K+]

Originally Posted by Gazdkw

So I recently scanned my car cleared all the faults and then scanned again a few weeks later.

Its come up with some amber warnings but I'm unsure if I should be worried or just to ignore them.

I would attached the photos I took of the laptop but uploading the attachment keeps failing.

The faults in red are the following. There are a load more amber warnings. Most electrical issues.

KVM-B10C200 left rear unlock pull switch

MMM-U220041 control module configuration memory corrupt. System internal failures - general checksum failure.

PDM-B116515 left front puddle lamp output. General electrical failures- circuit short to battery or open

Any help on the codes or how to successfully upload jpgs would be appreciated

Can't help on codes, but Volvo's have a habit of throwing codes at the drop of a hat. I just keep clearing mine and 95% go away and stay away.

I hope you are not asking how to upload Vida screen shots (cos I believe its to do with witchcraft, voodoo, and black magic) but I can tell you how to attach a jpeg from your computer/camera.

I store the image in a easy to access folder firstly AND make sure its a relatively small file size approx. 100-350 kbs If you try to upload images taken with a 8mb+ phone camera you will fail as the site don't handle that big a file.

So you have your file saved on your 'puter , you open the normal reply/start thread box; and just below the "message" label there are boxes for fonts and sizes. A bit further along just after the smiley face is a paper clip. Clicking on this brings up the manage attachment box in a separate window. There is a upload from your computer box and a browse button. Click the browse button and find the file you placed in the "easy access" location. Click the download button, and if the file is saved as a *.Jpg after a little while the file name will be shown to the left of the browse button you originally clicked on, and that about it.
Once you have done it a couple of times it becomes easier, esp if you have any files you want to upload well labelled and not buried in the file structure.

Good luck
Cheers
Bob