|
Diesel Engines A forum dedicated to diesel engines fitted to Volvo cars. See the first post in this forum for a list of the diesel engines. |
Information |
|
Volvo S80 D5252T performance clutchViews : 1556 Replies : 8Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 23rd, 2020, 20:37 | #1 |
New Member
Last Online: Apr 25th, 2021 18:52
Join Date: Aug 2019
Location: Plzen
|
Volvo S80 D5252T performance clutch
Hello,
I am looking for some performance clutch for my Volvo S80 with D5252T engine. I dont find any better solution than the original LUK/Sachs/Rymec clutch. But this is not enough. I want to adjust to 160kW with Garrett GT2259S, Do88, 12 Pumphead. So I need something better. The only solution which I can use now is dual friction clutch plate, but with original preassure plate. Can you help me with that? |
Apr 23rd, 2020, 23:27 | #3 |
New Member
Last Online: Apr 25th, 2021 18:52
Join Date: Aug 2019
Location: Plzen
|
|
Apr 24th, 2020, 18:51 | #4 |
Premier Member
Last Online: May 10th, 2022 21:01
Join Date: May 2009
Location: Wiltshire
|
I had 590nm on mine.
__________________
1983 244 |
The Following User Says Thank You to martin_r_smith For This Useful Post: |
Apr 24th, 2020, 21:15 | #5 |
New Member
Last Online: Apr 25th, 2021 18:52
Join Date: Aug 2019
Location: Plzen
|
What? Do you have Volvo TDI with Stock 240mm clutch?
Please can you share your setup? Because I have plan to 160+kW. I can use it for that. |
Apr 24th, 2020, 22:46 | #6 | |
Premier Member
Last Online: May 10th, 2022 21:01
Join Date: May 2009
Location: Wiltshire
|
Quote:
Dss 0.260 nozzles Lift pump Fuel cooler Ported head 3" exhaust (Inc downpipe) 75mm thick intercooler 3" boost pipes Oil cooler Upgraded head studs Upgraded main bearing bolts Custom tuning Stock flywheel, clutch realigned with sintered material. 260 bhp 590nm.
__________________
1983 244 |
|
The Following User Says Thank You to martin_r_smith For This Useful Post: |
Apr 25th, 2020, 17:16 | #7 | |
New Member
Last Online: Apr 25th, 2021 18:52
Join Date: Aug 2019
Location: Plzen
|
Quote:
Thank you for your answer on my topic. I read some topics from about TDI tuning. So at first. So do you have stock clutch kit, only with better clutch plate? With stock pressure plate? :-O. I have plan for minimum 160kW. Can you give me some tips fór that? I ordered Do88 intercooler, I have a new Rymec clutch kit, do I need a better material on clutch plate? I have refurbished pump with 12mm head, Oil catch can, engine in 100% technical condition, stronger screws...kat off I know about GT2259S from Iveco engine, that turbo Is compatible with T25. Which other things I shoudl buy? Do I need fuel cooler or oil cooler? Thank you very much! |
|
Jun 5th, 2020, 00:03 | #8 |
New Member
Last Online: Apr 25th, 2021 18:52
Join Date: Aug 2019
Location: Plzen
|
Up
|
Jul 2nd, 2020, 22:18 | #9 | |
New Member
Last Online: Apr 25th, 2021 18:52
Join Date: Aug 2019
Location: Plzen
|
Quote:
I have a question about my TDI engine. If you could answer me on that. I have a plan to remap my Volvo S80 TDI to the maximum that K14 can do 190-210hps. You know about my upgrades from this topic: https://www.volvoforums.org.uk/showthread.php?t=305484 Do88 IC Completely remanufactured pump with new HDK controller and 12mm head. 16 row Oil cooler with thermostat Sronger screws New clutch Catch can Cat off Simons sport system But at first, is it still possible to use this engine on low consumption with this setup, mainly due to the 12mm head? Because now after adjusting the pump with 12mm head, I have higher consumption. Although I set the lowest possible idle fuel dose. Is the solution in adapting the fuel map to a 12mm head? Is it possible to make an adaptation, raise the maximum performance of the K14 options and still be able to use it at low power without high load? Thank you! |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|