D4192t turbo oil feed pipe v40 1.9td

V40 SHOOTING BRAKE · Dec 22nd, 2019, 10:10

Good morning,anybody know if this is still available? The pipe runs from the bottom of the engine block,in u-shape up to the turbo,with a rubber reinforced section.anybody know the volvo part number

The rubber on mine,has deteriorated over time. Is there a suitable similar renault part/number? any idea of cost/availablity.

P156KWJ · Dec 22nd, 2019, 16:57

Could be barking up the wrong tree here but is it this one?

https://rover.ebay.com/rover/0/0/0?m...2F173966987334

V40 SHOOTING BRAKE · Dec 23rd, 2019, 06:17

Thank you for the reply,i had already looked at these aftermarket turbo oil lines by 'ajusa'.
I was rather hoping,somebody would have had the same problem,and was aware of the renault cross-reference? Or the original volvo part number?

P156KWJ · Dec 23rd, 2019, 10:07

The Volvo part number is in the description (if it is that one), unsure of any Renault number for it unfortunately as I've never needed to touch mine. Surprised I couldn't find one on Skandix as normally that's my go-to place for part numbers.

Give FRF Volvo of Swansea a ring, they have always been very helpful for me and if they sell the part, quote code C3 for a discount and they'll mail it you.

V40 SHOOTING BRAKE · Dec 30th, 2019, 18:52

Thanks there for the advice,tried frf at swansea,part is no longer avaialble,but they did give me the part number,which helps 3345500 to suit d4192t.
At worst,i have a local hydraulic pipe repair shop,that can probably renew the rubber braided joint,bit obviously the car will be off the road,whilst they do this.

Anybody got a broken d4192t motor sat under a bench,they could get the pipe off?

Dec 22nd, 2019, 10:10	#1
V40 SHOOTING BRAKE New Member Last Online: May 28th, 2022 07:54 Join Date: Dec 2019 Location: Ormskirk	D4192t turbo oil feed pipe v40 1.9td Good morning,anybody know if this is still available? The pipe runs from the bottom of the engine block,in u-shape up to the turbo,with a rubber reinforced section.anybody know the volvo part number The rubber on mine,has deteriorated over time. Is there a suitable similar renault part/number? any idea of cost/availablity.

Dec 22nd, 2019, 16:57	#2
P156KWJ Senior Member Last Online: Nov 6th, 2022 16:57 Join Date: Mar 2019 Location: Nottingham	Could be barking up the wrong tree here but is it this one? https://rover.ebay.com/rover/0/0/0?m...2F173966987334 __________________ Present: 2002 C70 2.0T, 2003 Saab 9-5 3.0 V6 TiD Past: 2002 S40 1.9D, 2002 S40 2.0T, 2004 S40 1.8, 2002 & 2004 V40 1.9D, 2006 Saab 9-5 2.3t Various other French and Italian boxes

Dec 23rd, 2019, 10:07	#4
P156KWJ Senior Member Last Online: Nov 6th, 2022 16:57 Join Date: Mar 2019 Location: Nottingham	The Volvo part number is in the description (if it is that one), unsure of any Renault number for it unfortunately as I've never needed to touch mine. Surprised I couldn't find one on Skandix as normally that's my go-to place for part numbers. Give FRF Volvo of Swansea a ring, they have always been very helpful for me and if they sell the part, quote code C3 for a discount and they'll mail it you. __________________ Present: 2002 C70 2.0T, 2003 Saab 9-5 3.0 V6 TiD Past: 2002 S40 1.9D, 2002 S40 2.0T, 2004 S40 1.8, 2002 & 2004 V40 1.9D, 2006 Saab 9-5 2.3t Various other French and Italian boxes

Dec 23rd, 2019, 06:17	#3
V40 SHOOTING BRAKE New Member Last Online: May 28th, 2022 07:54 Join Date: Dec 2019 Location: Ormskirk	Thank you for the reply,i had already looked at these aftermarket turbo oil lines by 'ajusa'. I was rather hoping,somebody would have had the same problem,and was aware of the renault cross-reference? Or the original volvo part number?

Dec 30th, 2019, 18:52	#5
V40 SHOOTING BRAKE New Member Last Online: May 28th, 2022 07:54 Join Date: Dec 2019 Location: Ormskirk	Thanks there for the advice,tried frf at swansea,part is no longer avaialble,but they did give me the part number,which helps 3345500 to suit d4192t. At worst,i have a local hydraulic pipe repair shop,that can probably renew the rubber braided joint,bit obviously the car will be off the road,whilst they do this. Anybody got a broken d4192t motor sat under a bench,they could get the pipe off?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)