|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
C30 HIDS QuestionViews : 1264 Replies : 13Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 2nd, 2014, 23:35 | #11 |
Master Member
Last Online: Sep 3rd, 2020 12:03
Join Date: Mar 2013
Location: Leicester
|
|
Jul 24th, 2014, 16:25 | #12 |
New Member
Last Online: Aug 9th, 2019 07:51
Join Date: Dec 2012
Location: stoke on trent
|
just received my canbus HID's and have now had the fear of god put into me after reading these post's re the wipers, so can I confirm a couple of things.
1. must earth the male spade negative/black terminal direct to the chassis rhs/os (do not plug it into the original plastic terminal) or do I plug it in & make an earth off the wiring. 2. by DRL you mean the main low beam headlights that come on when switch is in 12 o clock position, or the lights next to the headlamps (the ones that take 501's) 3.do the DRL's have to be deactivated to safely run HID's I apologise in advance as I know a lot of this has been covered, thanks 2007 V50 se D5 |
Jul 26th, 2014, 19:48 | #13 |
Junior Member
Last Online: Aug 20th, 2015 00:30
Join Date: Apr 2013
Location: Liverpool
|
I have HIDs fitted on mine I bought the best 55w hid kit from Hids4u.
I had my drls turned off at a volvo specialists which wasnt cheap. I was also worried about the wiper motor blowing prior to install. However I fitted everything in as normal, the ballasts on mine are both screwed onto the cars chassis on either side. Everything else such as the wires are all the same, I didn't earth it anywhere special. MY car is a s40 2008. I have had these installed for nearly a year now with no problems apart from the very rare bulb failure message maybe once every 3 months with 1 side not switching on. Nothing a restart doesn't solve though. |
Jul 30th, 2014, 11:00 | #14 |
New Member
Last Online: Aug 9th, 2019 07:51
Join Date: Dec 2012
Location: stoke on trent
|
Have fitted the hid's, earthed the ballasts using the brackets supplied, screwed behind the gap - behind the headlamps, just fits, and piggy backed the earth from the headlamps to the same point both sides. look great on projectors. no warnings at all.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|