1989 240 GL Wheel trims

kirkwallcity · Feb 21st, 2012, 18:55

Hi folks,

I am looking for a full set of trims for my F reg 240. They look like the picture attached, but the Volvo logo seems to be a light silver colour, and are 14" wheels.

Any help greatly appreciated.

Bob

240 · Feb 22nd, 2012, 12:51

full set here

http://www.ebay.co.uk/itm/volvo-240-...item53eb89ca82

not mine

kirkwallcity · Feb 22nd, 2012, 13:05

Thanks for your help. I'm looking for a spotless set, which I suspect will be like finding a needle in a haystack. Think I might have found an American company to send some over in vg condition.

Thanks again
Bob

roland2937 · May 10th, 2012, 19:26

Quote:

Originally Posted by kirkwallcity

Think I might have found an American company to send some over in vg condition.

Bob

I am looking for exactly the same wheel trims. If this company has more than 1 set can you provide details please. Thanks

kirkwallcity · May 10th, 2012, 21:46

Hi Roland2937,

I got nowhere with that. It was the centres that I wanted to replace, but I ended up getting a local company to make 4 out of thin steel. I then sprayed them up and ordered a set of logos from www.davebarton.com. They all look as good as new now.

Cheers
Bob

roland2937 · May 11th, 2012, 08:23

Thanks Bob - I was after a few complete plastic wheel trims for 14" wheel.

Roland

Feb 22nd, 2012, 12:51	#2
240 BOB MY BIG OLD BUS Last Online: Jan 15th, 2014 01:06 Join Date: Apr 2010 Location: NORTH EAST	full set here http://www.ebay.co.uk/itm/volvo-240-...item53eb89ca82 not mine __________________ ~ Never, ever, argue with an idiot. They'll drag you down to their level and beat you with experience ~

May 11th, 2012, 08:23	#6
roland2937 New Member Last Online: Dec 29th, 2016 14:52 Join Date: Feb 2011 Location: Tonbridge	Thanks Bob - I was after a few complete plastic wheel trims for 14" wheel. Roland __________________ 2010 C30 2.0D 1989 240 DL Est 230K

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Feb 22nd, 2012, 13:05	#3
kirkwallcity Junior Member Last Online: Dec 5th, 2023 08:04 Join Date: Feb 2012 Location: Kirkwall View Photos By: kirkwallcity	Thanks for your help. I'm looking for a spotless set, which I suspect will be like finding a needle in a haystack. Think I might have found an American company to send some over in vg condition. Thanks again Bob

May 10th, 2012, 21:46	#5
kirkwallcity Junior Member Last Online: Dec 5th, 2023 08:04 Join Date: Feb 2012 Location: Kirkwall View Photos By: kirkwallcity	Hi Roland2937, I got nowhere with that. It was the centres that I wanted to replace, but I ended up getting a local company to make 4 out of thin steel. I then sprayed them up and ordered a set of logos from www.davebarton.com. They all look as good as new now. Cheers Bob

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)