M90 gearbox

[foggyjames]

Ok, well I'm asking £300. The manual 960s had a dual mass flywheel which weighs an absolute ton. The solid flywheel from a 5-pot is probably the best best. There's a 228mm or 240mm clutch option (the latter being from an 850R), depending on how much torque you need it to hold.

cheers

James

[Burdekin]

James, let me know how you get on. I'll take it if Karlos or someone else doesn't want it, I fancy having a spare but if someone else really needs one then that's probably better.

[karlos_uk]

well my 940 has destroyed itself so the 960 auto will remain auto for the time being unfortunately

[auchlinn]

mitch I have a box and other spares to get rid of ,I am near Turriff .I tried to pm you but it wont let me for some reason ??
send me a pm with a phone no if you are interested or at least let me know ,
scrappie tried hard to get it today

[Jim760]

will that M90 fit the redblock AND a whiteblock?? lol shows how much i know.. if it does fit redblock and mich doesnt want it, what would your price be? imtrying so hard to ditch the auto in my 760ET.
im over by glasgow

[auchlinn]

the one I have is fitted to a 2.3 lpt
if you just want the box how much do you think its worth ?
would you collect or how would it get to you ?

[Jim760]

whats it worth.. as little as possible im trying decide wich way is better to go, i may have chance of a manual car to use the parts from, but its only got an m47, but has everything i need to finaly be manual for less than £150. but if i do that then try to go m90, im going to need to buy some of the parts again (propshaft front section, clutch, slave cylinder etc) rather silly to do that dont you think? saying that finding the gear to go with the m90 wont be cheap either will it, but may work out at the same sort of price as the m47 conversion if i buy all needed parts in bits... luck of the draw really on that one.

i think your going to need to bring a figure to mind.. somone here asked silly money for one, i wouldnt dare pay high for the box alone.. i have to remember i can do a full m47 conversion for 150 and in the one go.. give me your lowest figure on it and we'l talk
Jim

[karlos_uk]

scrappers near me had 2 for £80 a piece if that helps

[auchlinn]

does anyone want the whole car ? head gasket has a slight leak but it was running ok new gasket should cure that ,whole car maybe £200
as to a price for the box ?? if you take it out yourself maybe £120 and that could include the clutch and prop if needed
I have a few other bits and bobs as well

[Jim760]

i think i need to speak to you about this.. can you give me a call? 07742 927745
cheers
Jim