|
S40 / V40 '96-'04 General Forum for the Volvo S40 and V40 (Classic) Series from 1995-2004. |
![]() |
|
Fenix 5.1 ECU read with DDT2000Views : 12224 Replies : 17Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Jun 15th, 2014 20:48
Join Date: Jul 2010
Location: Skopje
|
![]()
Hi everyone,
After two weeks of experimenting and searching I finally connected and got live data from my 2.0 S40 with fenix 5.1. If anyone is interested I can give you instructions how to do it. BTW You will need to build/rework an adapter cable to do it, so if you are ok with soldering its not that hard to make it.... |
![]() |
![]() |
The Following 3 Users Say Thank You to pepisan For This Useful Post: |
![]() |
#2 |
Premier Member
Last Online: Nov 15th, 2022 21:34
Join Date: Apr 2010
Location: London / Essex
|
![]()
That sounds interesting. Feel free to post here the procedure, so everyone can benefit from it. I am quite curious o what you did now
__________________
Current car: 2002 S40 1.9D, 1992 240SE Nullius in Verba
|
![]() |
![]() |
![]() |
#3 |
New Member
Last Online: Sep 12th, 2014 15:28
Join Date: Aug 2007
Location: Rio Maior
|
![]()
Hi Pepisan
I'm very interested to know how you did it, if you could give instruction that would be awsome!!!! ![]() |
![]() |
![]() |
![]() |
#4 |
New Member
Last Online: Jun 15th, 2014 20:48
Join Date: Jul 2010
Location: Skopje
|
![]()
Ok, so here is what you will need:
1. interface that will support baud rates like: 5, 10400, 62500 2. Installed ddt2000 3. knowledge of french would be an advantage The adapter I made is from this schematic: ![]() You will need too supply +5v and gnd from ftdi to the 7400, this is not in the schematic, but is necessary. You download and install DDT2000: torrent file http://rutracker.org/forum/viewtopic.php?t=1918715 I have win 7 32bit, some people said it won't work with 64bit but I haven't tried. You will need to install fdti drivers (latest) and the new com port will show in ddt2000 configuration. You connect to the car as follows: 4 --- GND 16 --- +12 15 --- L 11 --- K You need to manually select Fenix 5.1 when you start ddt2000: Vehicles > Megane/Scenic > ECU > Fenix 5.1 Then go to screens and start the communication (play + green button) You can also record the data and look at it as graphs: Here are some pics of the whole thing: ![]() ![]() Isn't very nice but if you put it in a box with nice cables it would look better... ![]() And some images of the data you get: This is the Screens (Parameters live data) ![]() And the recorder ![]() BTW I'd like to thank A40 for the schematic. It was a difficult task to find the correct way ti initialize this specific ECU. |
![]() |
![]() |
![]() |
#5 |
New Member
Last Online: Sep 12th, 2014 15:28
Join Date: Aug 2007
Location: Rio Maior
|
![]()
Thanks again Pepisan
One question though, can you read DTC's from the FENIX 5.1 ECU and erase them with this setup? And reset the Service Light? ![]() |
![]() |
![]() |
![]() |
#6 |
New Member
Last Online: Jun 15th, 2014 20:48
Join Date: Jul 2010
Location: Skopje
|
![]()
I can't confirm that. There is an option to read and erase errors but I didn't get any errors (dtc) ...
It shows a message No errors found but also no definition in the database, so either there are no errors or it doesn't show them. My check engine is off so maybe there are no errors present. I think that this ecu doesn't record past errors if the state is corrected, but maybe I'm wrong. For the service light I don't know, but there are a lot of options, even reprograming... My guess is probably yes but you need to find it. Anyway I find the live data most useful. You can drive and replicate the problem and review the data after. You can record all sensors and ecu decisions like fuel trim, iac. This is more usefull than reading errors. |
![]() |
![]() |
The Following User Says Thank You to pepisan For This Useful Post: |
![]() |
#7 |
New Member
Last Online: Sep 12th, 2014 15:28
Join Date: Aug 2007
Location: Rio Maior
|
![]()
Hi Everyone!!!
Based on Pepisan's experience I bought a VAG KKL usb/com OBD2 cable on Ebay with the FT232Rl chipset. Then i opened up the OBD connector and cut the pin 7 (K line) and soldered it to pin 11 on the connector, and Voilá!!! I had my diagonstic interface done!!! Then I tested it on my Volvo V40 1.6 (1999) Petrol 105Hp , engine B4164s, ECU Fenix 5.1. And like Pepisan I could read live data with Renault's DDT2000 software. I can Confirm also that it can erase codes stored in ECU Memory. But in this case there are not mentioned in numeric format, but are mentioned in french with the designation For example "Panne...sonde oxygene.." ![]() Most of the softwares capabilities are not working, whitch is understandable but, it does the essential , reading live data and erasing error codes stored in ECU 's memory. Thanks again Pepisan Last edited by zealemao; Mar 18th, 2014 at 18:00. |
![]() |
![]() |
The Following 2 Users Say Thank You to zealemao For This Useful Post: |
![]() |
#8 |
New Member
Last Online: Mar 24th, 2014 10:05
Join Date: Mar 2014
Location: Gdynia
|
![]()
Hi
Zealemao you said that VAG KKL with K line connected to 11 pin OBD working properly. But as I know at VAG KKL there is LM339 on pcb. Can you check what ic except FT232 you have inside ? I tried modified (K line ->11 pin OBD) VAG KKL cable with my D4192T2 and there is no connection on lifedata screen, but DDT2000 recognize ECU on main window. Maybe I have wrong COM (USB) settings. Did you change something there? Thanks in advance. |
![]() |
![]() |
![]() |
#9 |
New Member
Last Online: Mar 22nd, 2014 19:30
Join Date: Mar 2014
Location: moulhouse
|
![]()
hello everyone
I ask for help to buy a cable obd2 because I do not understand the electronics. I just want to reset service light and read ecu (phenix5.1) saw this on ebay, it is possible to do with this cable and changing the pin http://www.ebay.com/itm/USB-KKL-VAGC...ht_5387wt_1208 thank for help |
![]() |
![]() |
![]() |
#10 |
New Member
Last Online: Sep 12th, 2014 15:28
Join Date: Aug 2007
Location: Rio Maior
|
![]()
I took some pictures from the inside of my cable, hope that will help you.
http://www.pictureshack.us/view_5482...21_191730a.jpg http://www.pictureshack.us/view_1396...21_192113a.jpg http://www.pictureshack.us/view_1753...21_192012a.jpg Notice that I cut the Pin7 conector to the PCB and soldered the orange wire to the Pin 11. As you can see I have a LM393 besides the FT232RL. And Ricardo The cable you are trying to buy is very similar, but the chipset is diferent, it has FT232BL chip. I would not risk to buy a diferent chipset. About reseting service light, I don´t know if it can be done witch DDT2000 (did not try because light did not come on yet), and I did not try this cable with VOLVO-FCR software yet. |
![]() |
![]() |
The Following User Says Thank You to zealemao For This Useful Post: |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|