|
S40 / V50 '04-'12 / C70 '06> / C30 '07-'12 General Forum for the S40 / V50 '04> / C70 '06> /C30 '07> models. |
![]() |
|
C30 No power up hillsViews : 215 Replies : 4Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Dec 28th, 2020 20:49
Join Date: May 2010
Location: Hexham
|
![]()
I've just bought a 2008 C30 1.6D with 90000 miles on the clock. The vehicle starts, ticks over and runs perfectly with good acceleration and no misfire or uneveness. Unfortunately when climbing hills (even gentle motorway inclines) the speed drops off dramatically often requiring 1st gear just to keep moving. Any ideas please - I'm suspecting fuel filter, but the problem only arises up hills.
|
![]() |
![]() |
![]() |
#2 |
Junior Member
Last Online: Today 11:35
Join Date: Aug 2020
Location: Ormskirk
|
![]()
Any error codes showing?
If not I would start with a full service including oil, air and fuel filters. May be worth running a tank of premium diesel (shell vpower or equivalent) or a fuel system cleaner through as well along with a decent motorway run in a gear or two lower than normal. |
![]() |
![]() |
![]() |
#3 | |
New Member
Last Online: Today 11:08
Join Date: Jun 2018
Location: Limoges
|
![]() Quote:
I'm thinking diesel particulate filter (dpf) being clogged. You should receive an error code for that, and you probably would notice it on the flat BUT it is VERY noticeable on climbs. It depends on what kind of journeys you're doing/how you drive. On around-town runs, it's possible you may not notice it. You'll not get more than around 4500 rpm with a clogged dpf. |
|
![]() |
![]() |
![]() |
#4 |
Member
Last Online: Today 11:38
Join Date: Nov 2004
Location: Fife
|
![]()
Don't think mine went over 3000 rpm when in limp mode and the turbo seemed to be disabled. As said before, rev it at a standstill..... will it rev over 3000?
__________________
Present: 2009 Volvo V50 1.6D DRIVe SE Past: 2004 Volvo S40 T5 SE |
![]() |
![]() |
![]() |
#5 |
Master Member
Last Online: Today 01:02
Join Date: Mar 2017
Location: Manchester
|
![]()
check eloys fluid level and dpf pressures
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|