|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Fitting new front wishbonesViews : 961 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 18th, 2019, 19:24 | #1 |
Swedenborg
Last Online: May 25th, 2019 18:40
Join Date: Feb 2019
Location: Ashford
|
Fitting new front wishbones
Hi guys
With the weather so mild it’s great to get and do the jobs on your car that you have been putting off. Today I decided to replace both front lower suspension wishbones so as to make certain that it sails through the dreaded MOT. Just a word to the wise folks make sure you get the right ball joint, as there are two for my 2008 V50 an 18mm & 21mm .. The guy at the parts counter looked up my vehicle by registration and reported that they were 18mm, great, back home and stripped the old one out with little fuss brilliant I thought, new one replaced all torqued up no problems until I was tightening the bottom ball joint, yep you guessed it, wrong size despite what the parts guys computer says, they are 21mm. Yes I should have checked the new part with the old one before fitting, something I will do in future to be sure. So save yourself some heartache guys of having to strip it all out again something I really hate doing. 2008 V50 shows up as 18mm so please beware and double check. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|